Loading...
HomeMy WebLinkAboutX2021-1666 - MiscA2021-1(0(00 4(01D N4ucrm(Al ff. State Contractors License 729905 FIRE ALARM DATA SUBMITTAL RESTROOM REIMAGING 1 ST FLOOR 4675 MACARTHUR COURT NEWPORT BEACH, CA 92660 JOB# T20031 Date Issue: 4/2/2020 Revision: Original Prepared By: Jstone BUILDING ELECTRONIC CONTROLS, INC. FIRE/LIFE SAFETY 2246 Lindsay Way • Glendora • California • 91740 Phone (909)305-1600 FAX (909)305-1603 "N' BEAU P11IM6 g 1 I. Building Meetronic Cuntrols, Inc. A2021-1(0(00 4(01D N4ucrm(Al ff. State Contractors License 729905 FIRE ALARM DATA SUBMITTAL RESTROOM REIMAGING 1 ST FLOOR 4675 MACARTHUR COURT NEWPORT BEACH, CA 92660 JOB# T20031 Date Issue: 4/2/2020 Revision: Original Prepared By: Jstone BUILDING ELECTRONIC CONTROLS, INC. FIRE/LIFE SAFETY 2246 Lindsay Way • Glendora • California • 91740 Phone (909)305-1600 FAX (909)305-1603 CONTRACTORS C�Ca STATE LICENSE BOARD ACTIVE LICENSEQ I 729905 CORP " BUILDING ELECTRONIC CONTROLS INC 4�m , C-7 C10 "o" 11/30/2020 www.cslb.ca.gov INDEX MODEL I MAKE DESCRIPTION CSFM # BPS10A EST -REMOTE POWER SUPPLY 7300-1657:0229 SLA1097 POWER PATROL -10.0 AH BATTERY N/A GCHFWN-S7VMC EST -SPEAKER/STROBE SELECTABLE CANDELA (CEILING MOUNT) 7320-1657:0324 SIGA-CC1S EST -SIGNAL MODULE 7300-1657:0121 5i T a��,,' ` w -Life Safety & communications arc71 MOA k �� ZZZZ� Overview The Booster Power Supply (BPS) is a UL 864, 9th Edition listed power supply. It is a 24 Vdc filtered -regulated, and supervised unit that can easily be configured to provide additional notification appliance circuits (NACs) or auxiliary power for Mass Notification/ Emergency Communication (MNEC), as well as life safety, security, and access control applications. The BPS contains the circuitry to monitor and charge internal or external batteries. Its steel enclosure has room for up to two 10 ampere -hour batteries. For access control -only applications, the BPS can support batteries totaling up to 65 ampere -hours in an external enclosure. The BPS has four Class B (convertible to two Class A) NACs. These can be activated in one or two groups from the BPS's unique dual input circuits. The BPS is available in 6.5 or 10 ampere models. Each output circuit has a capacity of three amperes; total current draw cannot exceed the unit's rating. The BPS meets current UL requirements and is listed under the following standards: Standard (CCN) Description UL864 9th ed.ltlon (ULM)Fire Alarm Systems UL636 (ANE, UEHX7) Holdup Ala" Units and Systems UL609 (AOTX, AOTX7) Local Burglar Alan Units and Systems UL294 (ALW, UEHX7) Access control Systems UL365 (APAW, APAW7) Police Station Connected Burglar Alarm Units and Systems UL1076 (APOU, APOU7) Proprietary Burglar Alarm System Units UL1610 (AMCX) Central Station Alarm Unit ULC -5527 (UOXXC) Control Ums, Fire Alarm (Canada) ULC -S303 (AOTX7) Local Burglar Alarm Units and Systems (Canada) C22.2 No. 205 Signaling Equipment (Canada) Page 1 of 4 b', Power Supplies and Accessories 44 7300-1657: 0229 Standard Features • Allows for reliable filtered and regulated power to be installed where needed • Cost effective system expansion • Provides for Genesis and Enhanced Integrity notification ap- pliance synchronization • Supports coded output operation • Self -restoring overcurrent protection • Multiple signal rates • Can be cascaded or controlled independently • Easy field configuration • On -board diagnostic LEDs identify wiring or internal faults • Standard Edwards keyed lockable steel cabinet with remov- able door • 110 and 230 Vac models available • Accommodates 18 to 12 AWG wire sizes • Optional tamper switch • Dual battery charging rates • Optional earthquake hardening: OSHPD seismic pre -approval for component Importance Factor 1.5 DATA, 777 85005-0125 Mott e '-cd fvr Issues Application The BPS provides additional power and circuits for notification ap- pliances and other 24 Vdc loads. It is listed for indoor dry locations and can easily be installed where needed. Fault conditions are indicated on the on -board diagnostic LEDs, opening the BPS input sense circuit and the trouble relay (if programmed). While this provides indication to the host system, the BPS can still be activated upon command. A separate AC Fail contact is available on the BPS circuit board, which can be programmed for trouble or AC Fail. There are seven on -board diagnostic LEDs: one for each NAC fault, one for battery fault, one for ground fault, and one for AC power. The unique dual -input activation circuits of the BPS can be acti- vated by any voltage from 6 to 45 VDC (filtered -regulated) or 11 to 33 Vdc (full -wave rectified, unfiltered). The first input circuit can be configured to activate 1-4 of the four possible outputs. The second input circuit can be configured to control circuits 3 and 4. When outputs are configured for auxiliary operation, these circuits can be configured to stay on or automatically deactivate 30 sec- onds after AC power is lost. This feature makes these circuits ideal for door holder applications. The BPS also has a separate 200 mA 24 Vdc output that can be used to power internal activation modules. BPS NACs can be configured for a 3-3-3 temporal or continuous output. California temporal rate outputs are also available on cer- tain models. This makes the BPS ideal for applications requiring signaling rates that are not available from the main system. Dimensions r D5 O Top Viewo O o D2 D3 04 D4—►o 17.0 in 3.5 in 13.0 in Front View (43.2 cm) (8.9 cm) (33.0 cm) (16.5 cm) p 1n 1O All knockouts for 3/4 in conduit (1.9 cm) DI D2 D3 D4 17.0 in 3.5 in 13.0 in 6.5 in (43.2 cm) (8.9 cm) (33.0 cm) (16.5 cm) In addition to the internally generated signal rates, the BPS can also be configured to follow the coded signal rate of the main Wire routing system NACs. This allows for the seamless expansion of existing NACs. The BPS enclosure has mounting brackets for up to three Signa- ture modules to the right of the circuit board. Engineering Specification Supply, where needed, Edwards BPS Series Booster Power Sup- plies (BPS) that are interconnected to and supervised by the main system. The BPS shall function as a stand-alone auxiliary power supply with its own fully -supervised battery compliment. The BPS battery compliment shall be sized to match the requirements of the main system. The BPS shall be capable of supervising and charging batteries having the capacity of 24 ampere -hours for Mass Notification/Emergency Communication (MNEC), life safety and security applications, and the capacity of 65 ampere -hours for access control applications. «The BPS shall be capable of installation for a seismic com- ponent Importance Factor of 1.5.» The BPS shall provide a minimum of four independent, fully supervised Class B circuits that can be field configurable for notification appliance circuits or auxiliary 24 Vdc power circuits. BPS NACs shall be convertible to a minimum of two Class A NACs. Each BPS output circuit shall be rated at 3 amperes at 24 Vdc. Each output circuit shall be provided with automatically restoring overcurrent protection. The BPS shall be operable from the main system NAC and/or Edwards Signature Series control modules. BPS NACs shall be configurable for continuous, 3-3-3 temporal or optionally, California rate. Fault conditions on the BPS shall not impede operation of main sys- tem NAC. The BPS shall be provided with ground fault detection circuitry and a separate AC fail relay. Route AC supply through these knockouts only (Nonpower -limited and superv[sed) X EF to a CD G F D5 2 D6 3.375 in 12.0 in (8.6 cm) (30.4 cm) Power -limited wiring area 1,t Ml � o-, iUtiisi?�s3. a ❑ CY t t?'r)���j't ft+�i��. � ❑ [3]iiiauilil��lifl+n t ib ,r 1= muguW Battery wiring (nonpower - limited and supervised) o Battery Battery Notes 1. Maintain 1/4 -inch (6 mm) spacing between power -limited and nonpower -limited wiring or use type FPL, FPLR, or FPLP cable per NEC. [2] Power -limited and supervised when not configured as auxiliary power, Non - supervised when configured as auxiliary power. [3] Source must be power -limited. Source determines supervision. 4. When using larger batteries, make sure to position the battery terminals towards the door. Page 2 of 4 �,' -r rr v 1777 85005-0125 Pn+'n be use, ✓t+is -I -w';. ss. issues Typical Wiring Single or cascaded booster anywhere on a notification appliance circuit Existing NAC end -of -line resistors are not required to be installed at the booster's terminals. This allows multiple boosters to be driven from a single NAC circuit without the need for special configurations. Configuring the Booster for AC Power Fail delay operation' NAC Circuit Notification appliance circuit (NAC) To next signaling NAC Circuit AUX1 - device, booster, or Ni + AUX2 - Notification appliance circuit (NAC) NAC2/ + AUX2 - EOL resistor Fire Alarm U) y N NAC output #1 NAC output #2 Control Panel N NAC output 43 AUX4 - > q NAC output #4 Multiple CC1(S) modules using the BPS'S sense inputs TBi Notification appliance circuit (NAC) NAC1/+ UL listed NAC1/+ AUX1 - i Y EOL 15 kO AUX1 - Ni + AUX2 - Notification appliance circuit (NAC) NAC2/ + AUX2 - NAC3/ + UL listed Ni + AUX3 - ==DEED EOL 15 kR AUX3 - NAC4/ + NAC4/ + AUX4 --ff AUX4 - 200 mA AUX Ja + 200 mA AUX m Continuous F - Continuous mo + IN IN Sense 1 COM - Sense 1 COM OUT + OUT IN ER IN Sense 2 COM ER EOL 47 kO 109 Sense 2 COM OUTCC1(S) module [1][3] OUT NO o o NO Trouble COM 1 7 6 5 4 3 2 1 Trouble COM NC NC TB2 + + CT1 Data in from Data out to module [4] Previous device next device 0 0 or Signature controller Data in from previous + 'rhe Booster supports AC Power fail delay device or Signature pato out to of three hours via its trouble contact when controller next device dip switch SW2-6 is on. All other troubles are reported to supervising module or panel without delay via Sense inputs. Security and access NAC1/ + AUX1 - NAC2/ + AUX2 - NAC3/ + AUX3 - NAC4/ + Notification appliance circuit (NAC) UL listed YQ =a EOL 15 KW Notification appliance circuit 24V 12V Security Security EOL 24DC12 device device monitoring device UL listed EOL 15 KW 47 K 47 K IIE-11 1101 109 109 CC1(S)module CC1(S)module 18765 0 0 0 0 4321 4321 MMOV [3] [1] Disable the BPS's ground fault jumper (JP3) Page 3 of 4 To next device or end oA .�$„er:r 85005-0125 c. !o .� �, z. ,n Issue 1. Requires installation of sepa- rate battery cabinet. 2. BPS supports batteries greater than 24 Amp hours for access control applications only. 3. For earthquake anchorage, Including detailed mounting weights and center of gravity detail, refer to Seismic Applica- tion Guide 3101676. Approval of panel anchorage to site structure may require local AHJ, structural or civil engineer review. Page 4 of 4 1. Model BPS'CAA provides selection for California rate, in place of temporal. 2. Maximum of 8 Amps can be used for auxiliary output. Ordering Information Catalog Description. Shipping.'.. Number Wt. lb. (kg)'' BPS6AC BPS6CAA 6.5 Amp Booster Power Supply with California rate 13(5.9) BP$10Ai1 10 Amp Booster Power Supply 13(5.9) BPSI OAC 10 Amp Booster Power Supply (ULC) 13(5.9) 3 BC -2 Battery Cabinet (up to 2 - 17 Amp Hour Batteries) 19(8.6) 7 , s?; [ � _ 85005-0125 1 lo, -irea ,r -ns 1 io' .r: csec. Issue Specifications Model 6.5 amp Booster 10 amp Booster AC Line Voltage 120VAC or 220 240VAC 50/60Hz 120VAC or 220-240VAC 50/6OHz 390 watts 580 watts Contact us... Notification Appliance 3.OA max. per circuit @ 24Vdc 3.0A max. per circuit @ 24Vdc Email: edwards.fire@fs.uto.com Circuit Ratings nominal 6.5A max total all NACs nominal 1 OA max total all NACs Web: www.est-fim.com Trouble Relay 2 Amps @ 30Vdc EST is an EDWARDS brand. Auxiliary Outputs Four configurable outputs replace NACs 1, 2, 3 or 4. as auxiliary outputs and 200 mA dedicated auxiliary. (See note 2.) 1016 Corporate Park Drive Mebane, NC 27302 Input Current 3mA @ 12Vdo, 6mA @ 24Vdc (from an existing NAC) In Canada, contact Chubb Edwards... Booster Internal 70mA+ 35 mA for each circuit set to AUX Com Email: inquiries@chubbedwards.com Supervisory Current .Com Web: wwwchubbedwards.com Booster Internal Alarm 270mA ©2013 UTC Fire& Security Americas Current Corporation, Inc. All rights reserved. Specifications subject to change Signature Mounting Accomodates three two -gang modules. without notice. Edwards is part of UTC Space Climate, Controls & Security, a unit of Maximum Battery Size 10 Amp Hours (2 of 12V1 OA) in cabinet up to 24 Amp hours with ex - United Technologies Corporation. ternal battery cabinet for fire and security applications; up to 65 Amp hours for access control applications in external battery box. Terminal Wire Gauge 18-12 AWG Relative Humidity _ 0 to 93°/v non condensing @ 32'C Temperature Rating 32' to 120'F (0' to 49°C) NAC Wiring Styles Class A or Class B Output Signal Rates Continuous, California rate, 3-3-3 temporal, or follow installed panel's NAC. (See note 1.) Ground Fault Detection Enable or Disable via jumper Agency Listings UL, ULC, CSFM 1. Requires installation of sepa- rate battery cabinet. 2. BPS supports batteries greater than 24 Amp hours for access control applications only. 3. For earthquake anchorage, Including detailed mounting weights and center of gravity detail, refer to Seismic Applica- tion Guide 3101676. Approval of panel anchorage to site structure may require local AHJ, structural or civil engineer review. Page 4 of 4 1. Model BPS'CAA provides selection for California rate, in place of temporal. 2. Maximum of 8 Amps can be used for auxiliary output. Ordering Information Catalog Description. Shipping.'.. Number Wt. lb. (kg)'' BPS6AC BPS6CAA 6.5 Amp Booster Power Supply with California rate 13(5.9) BP$10Ai1 10 Amp Booster Power Supply 13(5.9) BPSI OAC 10 Amp Booster Power Supply (ULC) 13(5.9) 3 BC -2 Battery Cabinet (up to 2 - 17 Amp Hour Batteries) 19(8.6) 7 , s?; [ � _ 85005-0125 1 lo, -irea ,r -ns 1 io' .r: csec. Issue General Purpose Battery Batteries Battery Specification Sheet Technical Nominal Voltage 12 V Nominal Capacity (20HR) 10.OAh Chemistry Lead Acid (AGM) Physical Length 151 mm 5.95 in. Width 65 mm 2.56 in. Height 111 mm 4.37 in. Total Height (w/ terminals) 117 mm 4.61 in. Weight 3.2 kg 7.06 lbs Terminal Type .250" Faston Case Material Black ABS Capacity 20HR, 1.80V/cell, 25°C/77°F 10.OAh 0.50A 10HR, 1.80V/cell, 25'C/77"F 9.30Ah 0.93A SHR, 1.75V/cell, 25°C/77"F 8.1 OAh 1.70A 3HR, 1.75V/cell, 25°C/77°F 7.65Ah 2.55A 1HR, 1.60V/cell, 25°C/77°F 6.28Ah 6.28A Maximum Discharge Current 150A (5 seconds) Self Discharge to 80% 6 months @ 25°C Internal Resistance -22 mn Tll Charging Initial Charging Current 3.0 A Cycle Use 14AV-15.OV at 25°C(77`F) Standby Use 13.5V -13.8V at 25°C(77°F) interstatebatteries.com Specifications are subject to change w/out notice. 0 interstate Battery system or America, Inc. 05/11 General Purpose Battery Batteries Battery Specification Sheet Discharge Characteristics Float Charging Characteristics Temperature Effects in Relation to Battery Capacity I Cycle Life in Relation to Depth of Discharge Effect of Temperature on Long Term Float Life Self DischargeCharacteristics pe ss outmenleryenNge raer,ep ICam/ out supplementary cnarya Oelore use If V10%capacity Is requlndl aupplem.a., char0o mqulretl bebre uee.Oyllanal eharylnp way n below: zcM1:�lso os ionopmmr men': fa ziina u o :: i ei.°'y: i.uvi :n. l.Chnrgetl fw 6-10houm al Ilmlad currant 0 OaCA. aupplamanlary chase my open fall to mcowrthe capaclry. The6attaryahouldnave ks, left appealing till this is machad. interstatebatteries.com Specifications are subject to change w/out notice. 0 Interstate Battery system of America, Inc. 05/11 Z� '�EST NIV-Life Safety B communications , mill mill ,mill • • • , Overview The Genesis line of ceiling life safety and emergency communica- tions speakers and speaker -strobes combine high performance output with a low profile design to deliver a life safety signal solu- tion that's as versatile as it is effective. While they are designed to mount inconspicuously overhead, these devices are also rated for wall -mounted applications. Clear -lens speaker -strobes are available in high and low candela models, which feature 15 to 95, or 95 to 177 cd output (see order- ing information). Ceiling speakers feature 1/4 W to 2 W operation, which allows devices to be easily fine-tuned to achieve maximum benefit in exchange for the lowest possible system overhead. Light output and wattage tap settings are selectable with conven- iently -located switches. Settings remain clearly visible even after final installation, yet they are locked in place to prevent unauthorized movement after installation. High fidelity models meet the NPFA 520 Hz requirements for newly construced commercial sleeping areas. They also produce crisp, clear voice audio output that is highly intelligible over large areas. These low -profile appliances feature textured housings in architec- turally neutral white or eye-catching life safety red. Optional ALERT or FIRE markings make them ideal for applications that require differentiation between life safety and mass notification alerts. Page 1 of 6 a '% Speakers, Tolophones FC U� X USC MEA `..� 211/0285 52813 See Specifications Sectlon /or listings details. Standard Features • High Fidelity 520 Hz speaker models available Low frequency output meets NFPA standards for newly con- structed commercial sleeping areas; increases sound fidelity and audio intelligibility. • Field configurable - no need to remove the device - Select 114, 1/2, 1, or 2 watt operation - 15/30/75/95 cd and 95/115/150/177 cd models available - Switch settings remain visible even after the unit is installed • Ideal for Mass Notification applications - amber lens models available with optional ALERT markings • Unique low -profile design - 30 per cent slimmer profile than comparable signals - Available with white or red housings • Unparalleled performance - loud 90 dBA output ensures clear, crisp audio - Precision strobe timing meets UL synchronization standards - 25 Vams and 70 Vents models available • Easy to install - Fits all standard 4 -inch square electrical boxes with plenty of room for extra wire - no extension ring or trim plate needed - #18 - #12 AWG terminals - ideal for long runs, existing wiring • Approved for public and private mode applications - UL 1971 -listed as signaling devices for the hearing impaired - UL 1638 -listed as protective visual signaling appliances - UL 1480 -listed as life safety speaker - UL/ULC listed for ceiling or wall use F- i T s rl c F r 85001-0641 �q n, hol .nx I u.; uses. Issue 1.2 Strobe Application Genesis strobes are UL 1971 or 1638 listed for indoor use. Prevailing codes require strobes to be used where ambient noise conditions exceed specified levels, where occupants use hearing protection, and in areas of public accommodation. Consult with your Authority Having Jurisdiction for details. All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. Synchronization for multiple strobe lights in a single field of view is required. See the Specifications table for compatible synchronization sources. Speaker Application The suggested sound pressure level for each signaling zone used with alert or alarm signals is a minimum of 15 dB above the aver- age ambient sound level or 5 dB above the maximum sound level having a duration of at least 60 seconds, whichever is greater. This is measured 5 feet (1.5 m) above the floor. Doubling the distance from the signal to the ear will theoretically cause a 6 dB reduction in the received sound pressure level. The actual effect depends on the acoustic properties of materials in the space. Doubling the power output of a device (e.g.: a speaker from 1 W to 2 W) will increase the sound pressure level by 3 dBA. A 3 dBA difference represents a barely noticeable change in volume. Combination audible/visual signals must be installed in accor- dance with guidelines established for strobes. High Fidelity Models Genesis G4HF Series High Fidelity appliances provide highly intel- ligible voice audio output. They are also effective in areas subject to high levels of ambient noise. These appliances are approved for use in sleeping areas under conditions described below. Sleeping Room Applications Genesis GCHF Series High Fidelity appliances are ideal for hotels, dormitories, and other residential occupancies where audible output must meet the 520 Hz signaling characteristics required by NFPA 72. In sleeping areas, always ensure that the wattage tap of the speaker is set sufficiently high so that the sound pressure reaches at least 75 dBA-fast at the pillow. These appliances are part of an end-to-end audio system ap- proved for use in sleeping areas when used in conjunction with approved audio hardware and a factory -supplied 520 Hz tone. Check the System Compatibility List for other 520 Hz signaling requirements. NOTE: Speakers driven by third -party audio systems are not UL approved for use in sleeping rooms. Mass Notification Applications p�irrr.: Genesis Mass Notification appliances bring 1` the same high-performance life safety features and unobtrusive design to mass notification applications. Models are available with optional ALERT housing labels, which make them ideal for applications that require differentiation between life safety and mass notification alerts. Page 2 of 6 Application Nates - Canada (Based in part on 1995 Canada National Building Code) The signal sound pressure level shall not exceed 110 dBA in any normally occupied area. The sound pressure level from an audible signal in a floor area used for occupancies other than residential occupancies shall not be less than 10 dBA above ambient levels, and never less than 65 dBA. In sleeping rooms the sound pres- sure level from an audible signal shall not be less than 75 dBA when any intervening doors between the device and the sleeping room are closed. Installation and Mounting All models are intended for indoor ceiling or wall applica- tions only. Speaker -strobes are mounted to a flush North -American 4" square electrical box, 21/8" (54 mm) deep. Genesis ceiling speaker - strobes simply unlatch and hinge down to open. This gains access to mounting screws and the selectable candela wattage tap switches. The shallow depth of Genesis devices leaves ample room behind the signal for extra wir- ing. Once installed with the cover in place, no mounting screws are visible. Installation Note: When installed, these devices are not centered on the electrical box. Make sure boxes are mounted to compensate for this difference. Use the mount- ing template provided with installation sheet 3100614. Field Configuration Candela switch Watlage with Genesis ceiling speaker- j L strobes may be set for 1/4, 1/2, 1, or 2 watt operation. De- R (/ pending on the model, Gen- 1 esis ceiling speaker -strobes mdmamr mmcam have multi -candela output (see ordering information). Output settings are changed by simply opening the device and sliding the switches to the desired settings. The speaker -strobe does not have to be removed to change the output settings. The settings remain visible through small windows on the front of the device after the cover is closed. Dimensions 8.3 da (211 mm) ,, ,. V'+•; i`" > ." "•,n. (2e mm) "+�; ;. i�itshi;u�auuii�u}Sidn i�{Cl�uru,iwr w� ,t~rtt;tk�,i6ii '"'' �"� 0.60"(15 mm) , s o � r 1 85001-0641 .. a IH) 1*,II , rumps, yes. Issue 1.2 Typical Sound Output (dBA) Measured at 2 watts setting in anechoic chamber 520 Hz Hiqh Fidelitv models (dBA) output at 3.05 m (10 eo° Light output - (effective cd) -re,dd,ddg oeefedampm - BO° i5° i r <r Percent of UL rating versus angle b •, An21e� Honzonlal and venal aulpub ra d iha same pa%e Standard cd output models Operating current, RMS (A) 1/4W 0.25W 1 81.4 81.5_ 81 25 '/2 W 0.50 W 84.5 84.3 84 VRMS 1 W 1.00 W 88.2 87.2 87 VRMS 2 W 2.00 W _ 90.0 90.1 91 Y<W 0.25W 81.5 81.9 81 70 '/2 W 0.50 W 84.1 84.9 84 VRMS 1 W 1.10 W 87.9 87.9 87 2 W 2.30 W 90.8 90.8 91 Standard Hz models (dBA) at 3.05 m (10 ft.) Light output - (effective cd) -re,dd,ddg oeefedampm - BO° i5° i r <r Percent of UL rating versus angle b •, An21e� Honzonlal and venal aulpub ra d iha same pa%e Standard cd output models Operating current, RMS (A) 1/4W 0.25W 81� 25 '/2 W 0.50 W 84 VRMS 1 W 1.00 W 87 0.437 2 W 2.00 W 90 95 1/4W 0.25W 81 70 '/2 W 0.50 W 84 VRMS 1 W 1.00 W 87 82 2W _ 2.00 W 91 Light output - (effective cd) -re,dd,ddg oeefedampm - BO° i5° i r <r Percent of UL rating versus angle b •, An21e� Honzonlal and venal aulpub ra d iha same pa%e Standard cd output models Operating current, RMS (A) VDC 0.109 0.151 0.281 0.318 VFWR 0.131 0.194 0.379 0.437 Light output (cd) Clear Lens 95 75 30 15 Amber Lens 82 65 26 13 High cd output models Operating current, RMS (A) _ VDC 0.330 0.392 0.502 0.565 VFWR 0.432 0.518 0.643 0_.693 Light output (cd) _ _ Clear Lens 1 177 150 115 95 Amber Lens 155 130 100 82 VDC = Volts direct current, regulated and filtered VFWR = Volts full wave rectified Operatinq currents shown above were measured at 16 VDC and 16 VFWR. 'Sound level output notes: dBA = Decibels, A -weighted. UL1480: Sound level output at 10 ft (3.05 m) measured in a reverberant room using 400 to 4,000 Hz band limited pink noise. ULC -5541: Meets or exceeds 85dBA in an anechoic chamber at 10 ft (3.05 m) on at least one setting per code. Directional characteristics: Within 6 dB of on -axis sound level when measured 90° off -axis (horizontal). Wiring Field wiring terminals accommodate #18 to #12 AWG (0.75 mm2 to 2.5 mm2) wiring. Input voltage matching the voltage rating of the speaker (25 or 70 Vrms) + + + + To listed fire alarm control panel To next appliance, 9 N;+ 0 rn y end -of -line A or return to Ii r=r_tA control equipment Input voltage matching the voltage rating of the strobe Page 3 of 6 PAH 85001-0641 t0i gc r us�,ii4.ri, zle P.Loll z msv, Issue 1.2 Specifications Housing Textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating. Red and white models available. Mounting Flush mount to North American 4 -inch square electrical box, 2-1/8 (54 mm) inches deep, or 960A-4RF round flush box. No extension ring required. Suitable for indoor wall or ceiling applications. Wire connections Screw terminals: polarized inputs for speaker, #18 to #12 AWG (0.75 mm2 to 2.5 mm2) wire size. Operating environment Indoor only: 32-1200 F (0-49° C) ambient temperature; 0-93% relative humidify. Agency listings and approvals, GC Models Meets ULC -5541, year 2004 UL requirements for standards UL1638 and UL1971. Complies with 1-111480 Fifth Edition. UL/ULC File Number; 52813. FM, MEA, CSFM approved. CSFM File Number: 7320-1657: 0211/0285. Speaker -strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. Agency listings and approvals, Low Frequency GCHF Models UL 464 Listed for low frequency signaling applications. Meets ULC -S541, year 2004 UL requirements for standards UL1638 and UL1971. Complies with UL1480 Fifth Edition. FM, MEA, CSFM pending. Speaker -strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. Supervisory voltage 30 V max. Speaker Operating Voltage 25 Vrms or 70 Vrms Speaker response 400 to 4,000 Hz Output See table on previous page. Strobe Light output Field selectable. See table on previous page. Operating current See table on previous page. Strobe output rating UL 1971, UL 1638, ULC S526: selectable 15/30/75/95 cd (VM models) and 95/115/150/177 cd (vMH models) Strobe operating voltage 16 to 33 VDC (24 VDC nominal) or 16 to 33 VFWR (24 VFWR nominal) Strobe flash rate One flash per second, default. Temporal setting (private mode only): synchronized to temporal output of Genesis audible signals on same circuit. Synchronization Meets or exceeds UL 1971 requirements. Maximum allowed resistance between any two devices is 20 Ohms. Refer to specifications for the synchronization control module, this strobe, and the control panel to determine allowed wire resistance. Synchronization Sources SIGA-CCIS, SIGA-MCC1 S, SIGA-CC2A, SIGA-MCC2A, G1 M -RM, BPS6A, BPS10A, APS6A, APS10A, 10 Series, Fireshield Plus 3, 5 and 10 zone. Lens Optical grade polycarbonate. Page 4 of 6 f -, A-;, 777-7 85001-0641 [ aolxexi„,, E1 r,,,z. ..n_�..rp uses, Issue 1.2 Ordering Information Model'. High I (520 Hz capable) dety Housing Color Text Marking Strobe Output Speak I Voltage Weigh Shipping Life safety Appliances GCHFRF-S2VMC ✓ Red FIRE Selectable 15, 30, 75, or 95 cd 25 Volt '/a, Y2, 1, or 2 watt) GCHFWF-S2VMC ✓ White GCF-S2VM _ GC-S2VM None GCHFRN-S2VMC ✓ Red GCHFWN-S2VMC ✓ White 5CHFRF-S2VMCH ✓ Red FIRE Selectable 95, 115, 150, 177 GCHFWF-S2VMCH _ ✓ White GCF-S2VMH — GCHFRN-S2VMCH ✓ Red None(Selectable GCHFWN-S2VMCH ✓ White _GC-S2VMH GCHFRF-S2 ✓ Red FIRE Speaker only models GCFR-S2 GCHFWF-S2 ✓ White GCF-S2 GCHFRN-S2 ✓ Red None GCHFWN-S2 ✓ White GC -S2 GCWN-S2 GCHFRF-S7VMC ✓ Red FIRE 15, 30, 75, or 95 cd V (Selectable ''/a, Y2, 1, or 2 watt) 1.62 Ib. (0.73 kg.) GCFR-S7VM GCHFWF-S7VMC ✓ White GCF-S7VM GCHFRN-S7VMC ✓ Red None GCHFWN-S7VMC' ✓ White GC-S7VM GCHFRF-S7VMCH ✓ Red FIRE 95, 115, 150, 177 GCHFWF-S7VMCH ✓ White GCF-S7VMH GCHFRN-S7VMCH ✓ Red None GCHFWN-S7VMCH ✓ White GC-S7VMH -- GCHFRF-S7 ✓ Red FIRE Speaker only models GCFR-S7 Red GCHFWF-S7 ✓ White GCF-S7 GCHFRN-S7 ✓ None _ GCHFWN-S7 ✓ _Red White GC -S7 GCWN-S7 Page 5 of 6 DATA s;I„1r r 85001-0641 '.,)i to! w��1110 i1 II�ion;u ,_s. Issue 1.2 Accessories Page 6 of s � 7, c7 85001-0641 01 nsta7 ,n �_rr'cz:es. Issue 1.2 Ordering Information ��I Model Text I I Lens I r Shipping IWeight F del � Marking Color Output Voltageobe Mass Notification Appliances, white housings Contact us... GCHFWA-S2VMA ✓ Email: edwards.fire@fs.utc.com ALERT Web: wwwest-fire.com GCWA-S2VMA Amber 13, 26, 65, EST is an EOWARD9 brand. GCHFWN-S2VMA ✓ or 82 cd 1016 Corporate Park Drive GCWN-S2VMA None Mebane, NC 27302 GCWN-S2VMC In Canada, contact Chubb ED- M GCHFWA-2VC S _ ✓ Clear 15, 30, 75, or 95 cd WARDS... GCWA-S2VMC Email: inquiries®chubbetlwards.com GCHFWA-S2VMAH ✓ ALERT 25 Volt Web: www.chubbedwards.com (Selectable ti 2015 United Technologies Corpora- GCWA-S2VMHA Amber 82, 100, 130, '1^.'�_, 1, or tion. All rights reserved. Specifications GCHFWN-S2VMAH ✓ or 155 cd 2 watt) subject to change without notice. GCWN-S2VM_HA None EDWARDS is part of UTC Building & Industrial Systems, a unit of United GCWN-S2VMHC Technologies Corporation. GCHFWA-S2VMCH ✓ Cleor T 5, 115, 150, 177 cd GCWA-S2VMHC ALERT GCHFWA-S2 ✓ GCWA-S2 Speaker only models 1.62 Ib. GCHFWA-S7VMA ✓ (0.73 kg.) ALERT GCWA-S7VMA 13, 26, 65, GCHFWN-S7VMA ✓ Amber or 82 cd GCWN-S7VMA None GCWN-S7VMC GCHFWA-S7VMC ✓ Clear 15, 30, 75, or 95 cd GCWA-S7VMC ALERT 70V GCHFWA-S7VMAH ✓ (Selectable GCWA-S7VMHA 82, 100, 130, '1^,'1/2, 1, or GCHFWN-S7VMAH ✓ Amber or 155 cd 2 watt) GCWN-S7VMHA None GCWN-S7VMHC GCHFWA-S7VMCH ✓ Clear 95, 115, 150, or 177 cd GCWA-S7VMHC ALERT GCHFWA-S7 ✓ ,, AIA �� Speaker only models Accessories Page 6 of s � 7, c7 85001-0641 01 nsta7 ,n �_rr'cz:es. Issue 1.2 :i>mioue9nxnu� PTTM fety & communicat/ons Synchronization Output Module SIQA CAIS MCC1 S Overview SIGA-CC1 S and MCC1 S Synchronization Output Modules are intelligent analog addressable devices that form part of EST's Signature line of products. The actual operation of the SIGA-CC1 S and MCC1 S is determined by the "personality code" selected by the installer, which is downloaded to the module from the Signa- ture loop controller during system configuration. Depending on their assigned personality, Synchronization Output Modules may be used as a signal power riser selector to provide synchronization of fire alarm signals across multiple zones, or for connecting, upon command from the loop controller, supervised Class B signal or telephone circuits to their respective power inputs. The power inputs may be polarized 24 Vdc to operate au- dible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation speakers and firefighter's telephones. Page 1 of 4 Standard Features t ,: 5� Intelligent Input -Output ....,-.x::..-.�.,..,, MEA t Patented • Provides UL 1971 -compliant auto -sync output for visual signals Use for connecting a supervised output circuit to a supervised 24 Vdc riser input and synchronizing multiple notification appli- ance circuits. • Functions as an audible signal riser selector Use as a synch module or for connecting supervised 24 Vdc AudibleNisible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs. • Built-in ring -tone generator When configured for telephone circuits, the SIGA-CC1S gener- ates its own ring -tone signal, eliminating the need for a sepa- rate ring -tone circuit. • Automatic device mapping Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop. • Electronic addressing Programmable addresses are downloaded from the loop con- troller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set. • Intelligent device with microprocessor All decisions are made at the module to allow lower com- munication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required. n S. T a s rl s_ c T 85001-0543 'Ntto b, us,d for .I ata" Fn-; ('F Issue 3.1 Application The SIGA-CCiS mounts to a standard North American two -gang electrical box, making it ideal for locations where only one module is required. Separate 1/0 and data loop connections are made to each module. The SIGA-MCCIIS is part of the UIO family of plug-in Signature Series modules. it functions identically to the SIGA-CC1S, but takes advantage of the modular flexibility and easy installation that characterize all UIO modules. Two- and six -module UIO mother- boards are available. These can accommodate individual risers for each on -board module, or risers that are shared by any combina- tion of its UIO modules. All wiring connections are made to termi- nal blocks on the motherboard. UIO assemblies may be mounted in Edwards enclosures. Personality Codes The operation of the SIGA-CC1 S is determined by their sub -type code or "Personality Code". The code is selected by the installer depending upon the desired application and is downloaded from the loop controller. Personality Code 5: Signal Power or Audio Evacuation (sin- gle riser). Configures the module for use as a Class B Audible/ Visible Signal power (24 Vdc polarized) or Audio Evacuation (25 or 70 VRMS) power selector. The ring -tone generator is disabled. The output circuit is monitored for open or shorted wiring. If a short exists, the control panel inhibits the activation of the audible/ visible signal circuit to prevent connection to the power circuit. Personality Code 6: Telephone with ring -tone (single riser). Configures the module for use as a Telephone power selector. When a telephone handset is plugged into its jack or lifted from its hook, the module generates its own Ring -Tone signal. A separate ring -tone circuit is not needed. The module sends this signal to the control panel to indicate that an off -hook condition is present. When the system operator responds to the call, the ring -tone signal is disabled. Personality Code 25: Visual Signal Synchronization. This personality code configures the module to provide synchronization of fire alarm signals across multiple zones. It functions as a signal power (24 Vdc) riser selector. The output wiring is monitored for open circuits and short circuits. A short circuit will cause the fire alarm control panel to inhibit the activation of the audible/visual signal circuit so the riser is not connected to the wiring fault. Warnings & Cautions This module will not operate without electrical power. As fires fre- quently cause power interruption, we suggest you discuss further safeguards with your fire protection specialist. Edwards recommends that these modules be installed according to latest recognized edition of national and local fire alarm codes. Compatibility The Synchronization Output Module is compatible with EST's Sig- nature Loop Controller operating under EST3 version 2.0 or higher, and QuickStart Signature Loop Intelligent Controller. Page 2 of 4 Installation The SIGA-CC1S: mounts to North American 2-1/2 inch (64 mm) deep 2 -gang boxes and 1-1/2 inch (38 mm) deep 4 inch square boxes with 2 -gang covers and SIGA-MP mounting plates. The terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2) wire size. SIGA-MCC1S: mount the UIOxR motherboard inside a suitable Edwards enclosure with screws and washers provided. Plug the module into any available position on the motherboard and secure the module to the motherboard with the captive screws. Wiring connections are made to the terminals on the motherboard (see wiring diagram). UIOxR motherboard terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2) wire size. 1.110 Motherboard 1 6-32 Self -tapping screws ]g-,nD" captive screws #6 Flat washers Cabinet or electrical enclosure Electronic Addressing The loop controller electronically addresses each module saving valuable time during system commissioning. Setting complicated switches or dials is not required. Each module has its own unique serial number stored in its "on -board memory". The loop control- ler identifies each device on the loop and assigns a "soft" address to each serial number. If desired, the modules can be addressed using the SIGA-PRO Signature Program/Service Tool. Testing & Maintenance The module's automatic self-diagnosis identifies when it is defec- tive and causes a trouble message. The user-friendly maintenance program shows the current state of each module and other perti- nent messages. Single modules may be turned off (de -activated) temporarily, from the control panel. Scheduled maintenance (Regular or Selected) for proper system operation should be planned to meet the requirements of the Authority Having Jurisdiction (AHJ). Refer to current NFPA 72 and ULC CAN/ULC 536 standards. c - 85001-0543 d 10,IJia1 in .a urpa�a,s. ISSue3.1 Typical Wiring SIGA-CCiS (Standard Mount) Riser in 1+1 Riser in 1-1 Data in l+I Data in I-1 Personality Typical Speaker `O7 Code 5 uvula Listed 47KW mL Personality Typical Telephone Circuit Code C C C Listed 47KW EOL uwLC Listed 47KW EOL Multiple CCI(S) modules using the i3PS's sense inputs NAC1/ + AUX1 - NAC2/ + AUX2 - NAC3/ + AUX3 - NAC4/ + AUX4 - 200 mA AUX N Continuous Do IN Sense 1 COM OUT IN Sense 2 COM OUT NO Trouble COM Page 3 of 4 1 Notification appliance circuit (NAC) Y = UL listed EOL 15 KW Notification appliance circuit (NAC) UL listed Y i EOL 15 KW ClAH 0 109 C1(S)module L =r, 0 0 5 4321 f11 [3] SIGA-MCC1S (UIO Mount) Personality Typical Speak Code 5 UL/ULCListed OF::�l 4IKW EOL Personality Typical Telephone Circuit Code 6 WILL C C C 4 NWEOLIetl Personality Enhanced Integrity and Genesis Devices Code 25 z z = uvua Listed 47KW EOL UIOIRI series motherboard Damm"- a Riser I Out iwe �� Riserlin s iBr4' Green LED INormoll Red LED Aetivel Risen Out D AT aL s i, e T 85001-0543 Nit to ! u cd t".r , lo ori e -:Does. Issue 3.1 WARDB A UTC Fire It Security Company Detection & alarm since 1872 U.S. T 888-378-2329 F 866-503-3996 Canada Chubb Edwards T 519 376 2430 F 519 376 7258 Southeast Asia T : +65 6391 9300 F: +65 6391 9306 India T: +9180 4344 2000 F : +91 80 4344 2050 Australia T+611 3 9239 1200 F +61 3 9239 1299 Europe T +32 2 725 11 20 F +32 2 721 86 13 Latin America T 305 593 4301 F 305 593 4300 utcfireandsecurity.com © 2010 UTC Fire & Security. All rights reserved. Page 4 of 4 Specifications '.. Catalog Number - SIGA-CCiS SIGA-MCCIS North American 21/2 inch (64 mm) deep two -gang boxes and 11/2 Plugs into U102R, U106R or U106 Mounting inch (38 mm) deep 4 inch square Motherboards boxes with 2 -gang covers and SIGA-MP mounting plates Description Synchronization Output Module Type Code 50 (factory set) Address Requirements Uses one module address Wiring Terminations Suitable for #12 to #18 AWG (2.5 mm2 to 0.75mm2) Operating Current Standby = 223pA Activated = 100pA Operating Voltage 15.2 to 19.95 Vdc (19 Vdc nominal) 24 Vdc = 2 amps Output Rating 25 V Audio = 50 watts 70 V Audio = 35 watts Construction High Impact Engineering Polymer Storage and Operating Operating: 32°F to 120eF (0°C to 49°C) Environment Storage: -4°F to 1407 (-20eC to 60°C) Humidity: 0 to 93% RH LED Operation Green LED - Flashes when polled Red LED - Flashes when in alarm/ active Compatibility Use with: Signature Loop Controller under EST3 version 2.0 or higher Agency Listings UL, ULC, CSFM, MEA Ordering Information Catalog .Description. Shipping Wt. Number Ibs(kg);:--. ,$1, $,' S; Synchronization Output Module (Standard Mount) - UUULC Listed 0.5 (0.23) SIGA- MCC1 S Synchronization Output Module (UIO Mount) - UUULC Listed 0.18 (0.08) Related Equipment 27193-21 Surface Mount Box - Red, 2 -gang 2(1.2) 27193-26 Surface Mount Box - White, 2 -gang 2 (1.2) SIGA-U102R Universal Input -Output Module Board w/Riser Inputs 0.32 (0.15) - Two Module Positions Universal Input -Output Module Board w/Riser Inputs SIGA-U106R - Six Module Positions 0.62 (0.28) SIGA-U106 Universal Input -Output Module Board - Six Module Positions 0.56 (0.25) 235196P Bi -polar Transient Protector 0.01 (0.05) MFC -A Multifunction Fire Cabinet --Red. 7.0 (3.1) supports Signature Module Mounting Plates SIGA-MP1 Signature Module Mounting Plate, 1 footprint 1.5 (0.70) Plate, 1/2 extended A I n 1: } I IS 85001-0543 �„_, !. QP: Qtel ni ,, sFs. Issue 3.1 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 7300-1657:0229 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center Parkway, Bradenton, 34202 United States Contact: Jewell Conover (941) 739-4358 Fax (941) 308-8123 Email: rhonda.conover@fs.utc.com DESIGN: Models BPS6A, BPS10A, BPS6A/230, BPS10A/230, BPS6CAA, and BPS10CAA remote booster power supplies. *Models APS6A, APS6A/230, APS6CAA, APS10A, and APS10AI230 Auxiliary Power Supply. Refer to listee's data sheet for detailed product description and operational considerations. RATING: 120 V/240 V, 60 Hz, 50 Hz INSTALLATION: In accordance with listee's printed installation instruction, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, rating, and UL label. APPROVAL: Listed as remote booster power supplies for use with listee's separately listed compatible fire alarm control units to extend the notification appliance circuit. Refer to listee's Installation Instruction Manual for details. NOTE: Formerly 7300-1591:229 7-29-10 me This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2020 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 7320-1657:0324 Page 1 of 2 CATEGORY: 7320 -- SPEAKERS LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center an endorsement or recommendation of the Parkway, Bradenton, 34202 United States should not be used Contact: Jewell Conover (941) 739-4358 Fax (941) 308-8123 operational requirements or installation criteria. Email: rhonda.conover@fs.utc.com DESIGN: Models GCHFWA-S2, GCHFWA-S7, GCHFRF-S2, GCHFRF-S7, GCHFWF-S2, GCHFWF-S7, GCHFRN-S2, GCHFRN-S7, GCHFWN-S2 and GCHFWN-S7 Speakers. Models GCHFRF-S2VMC, GCHFRF-S7VMC, GCHFRN-S2VMC, GCHFRN-S7VMC, GCHFWA-S2VMC, GCHFWA-S7VMC, GCHFWF-S2VMC, GCHFWF-S7VMC, GCHFWN-S2VMC and GCHFWN-S7VMC Speaker/Strobes. Models GCHFRF-S2VMCH, GCHFRF-S7VMCH, GCHFRN-S2VMCH, GCHFRN-S7VMCH, GCHFWA-S2VMCH, GCHFWA-S7VMCH, GCHFWF-S2VMCH, GCHFWF-S7VMCH, GCHFWN-S2VMCH and GCHFWN-S7VMCH Speaker/Strobes. Models GCHFWA-S2VMA, GCHFWA-S7VMA, GCHFWN-S2VMA and GCHFWN-S7VMA Speaker/Strobes. Models GCHFWA-S2VMAH, GCHFWA-S7VMAH, GCHFWN-S2VMAH and GCHFWN-S7VMAH Speaker/Strobes. Refer to listee's data sheet for detailed product description and operational considerations. RATING: 25 Vrms or 70 Vrms 1/4 W, 1/2 W, 1 W, or 2W Normal candela, clear lens: 15/30/75/95 cd Normal candela, amber lens: 13/26/65/82 cd High candela, clear lens: 95/115/150/177 cd High candela, amber lens: 82/100/130/155 cd INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name model number, electrical/candela rating and UL label. 07-21-15 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing No. 7320-1657:0324 Page 2 of 2 APPROVAL: Listed as speakers and speaker/strobes for use with separately listed compatible fire alarm control unit. Clear lens models (suffix ending in C or CH) are suitable for the hearing impaired. The lights are only considered synchronized when used in conjunction with Model G1M-RM sync module (CSFM No. 7300-1657:0201) or Model SIGA-CC1S auto -sync output module (CSFM No. 7300-1657:0121). For indoor ceiling mounted use only. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) in accordance with NFPA 72, 2010 Edition is required, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal. Refer to listee's Installation Instruction Manual for details. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) is required for sleeping areas in accordance with NFPA 72, 2010 Edition is required, the appliance must be used with a fire alarm control unit that can generate the low frequency signal. Refer to listee's Installation Instruction Manual for details. 07-21-15 gt s=� This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not sO,.r an endorsement or recommendation of the item listed. This listing should not be used to verify correct f " operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 7300-1657:0121 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center Parkway, Bradenton, 34202 United States Contact: Jewell Conover (941) 7394358 Fax (941) 308-8123 Email: rhonda.conover@fs.utc.com DESIGN: Models SIGA-CC1, SIGA-CC2, SIGA-CT1, SIGA-CT1HT, SIGA-CT2, SIGA-CR, SIGA-CRR, SIGA-UM, SIGA-MMI, SIGA-WTM, SIGA-IM, SIGA-MDM, SIGA-MAB, SIGA-MCT2, SIGA-MCC1, SIGA-MCC2, SIGA-MCR and SIGA-MCRR remote transponders. Models SIGA-AA30 and SIGA-AA50 audio amplifiers. Models SIGA-APS and SIGA-APS-220 power supplies. Models SIGA-MB4, SIGA-MP1, SIGA-MP2 and SIGA-MP2L mounting plates. Models SIGA-UIO2R, SIGA-UI06 and SIGA-UI06R motherboards. Model CS-SIGA-CC1P releasing module. Models SIGA-CC1S and SIGA-MCC1S Auto -Sync Output Modules. Models MFC -A and MFC -AD Enclosures. Model SIGA-CR2 Control Relay Module. Model SIGA-CT1 HT; Signature Series High Temperature Single Input Module. *SIGA-CRH High Power Control Relay Module. Refer to listee's data sheet for additional detailed product description and operational consideration. RATING: 15.2 - 19.95 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. NOTE: Formerly 7300-1591:121 and 7300-1388:178 *Rev 01-11-16 gt 10This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed ((//�,,��)) the test results and/or other data but does not make an independent verification of any claims. This listing is not sem; 7 an endorsement or recommendation of the item listed. This listing should not be used to verify correct "O' operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division 1141Lr, ._,.E. Ill r , Building Ele trcmie Controls, Inc.. State Contractors License 729905 CONTACT INFORMATION COMPANY: BUILDING ELECTRONIC CONTROLS, INC. ADDRESS: 2246 LINDSAY WAY GLENDORA, CA 91740 PHONE: 909.305.1600 FAX: 909.305.1603 CONTACT: RICK TAYLOR 2246 Lindsay Way Glendora, CA 91740 PHONE: (909) 305-1600 FAX: (909) 305-1603 ISnilding lilectrmiic Conhds, [nr.. State Contractors License 729905 FIRE ALARM DATA SUBMITTAL RESTROOM REIMAGING 1ST FLOOR 4675 MACARTHUR COURT NEWPORT BEACH, CA 92660 JOB# T20031 Date Issue: 4/2/2020 Revision: Original Prepared By: Jstone BUILDING ELECTRONIC CONTROLS, INC. FIRE/LIFE SAFETY 2246 Lindsay Way • Glendora • California • 91740 Phone (909)305-1600 FAX (909)305-1603 CONTRACTORS dC� STATE LICENSE BOARD ACTIVE LICENSE0 1 729905 =- CORP ro BUILDING ELECTRONIC CONTROLS INC C -i C10 wpm p � 11/30/2020 owwv.csib.ca.gov INDEX MODELMAKE DESCRIPTION CSFM # BPS10A EST -REMOTE POWER SUPPLY 7300-1657:0229 SLA1097 POWER PATROL -10.0 AH BATTERY N/A GCHFWN-S7VMC EST -SPEAKER/STROBE SELECTABLE CANDELA (CEILING MOUNT) 7320-1657:0324 SIGA-CC1S EST -SIGNAL MODULE 7300-1657:0121 RG-snsssascmmo,v„„-_.. -L/fe Safety & Communicattons Power, supplies BPS6A,;BPSIOA Overview The Booster Power Supply (BPS) is a UL 864, 9th Edition listed power supply. It is a 24 Vdc filtered -regulated, and supervised unit that can easily be configured to provide additional notification appliance circuits (NACs) or auxiliary power for Mass Notification/ Emergency Communication (MNEC), as well as life safety, security, and access control applications. The BPS contains the circuitry to monitor and charge internal or external batteries. Its steel enclosure has room for up to two 10 ampere -hour batteries. For access control -only applications, the BPS can support batteries totaling up to 65 ampere -hours in an external enclosure. The BPS has four Class B (convertible to two Class A) NACs. These can be activated in one or two groups from the BPS's unique dual input circuits. The BPS is available in 6.5 or 10 ampere models. Each output circuit has a capacity of three amperes; total current draw cannot exceed the unit's rating. The BPS meets current UL requirements and is listed under the following standards Standard (CCN) Description UL864 9th edition (MOgFire, Alarm Systems UL636 (ANET, UEHX7) Holdup Alarm Units antl Systems UL609 (AOTX, AOTX7) Local Burglar Alarm Units and Systems UL294 (AWY,, UEHX7) Access Control Systems UL365 (APAW, APAW7) Police Station Connected Burglar Alarm Units and Systems 911076 (APOU, APOU7) Proprietary Burglar Alarm System Units UL1610 (AMCX) Central Station Alarm Unit ULC -5527 (UO)CXq Control Units, Fire Alarm (Canada) ULC -S303 (AOTX7) Local Burglar Alarm Units and Systems (Canada) C22.2 No. 205 Signaling Equipment (Canada) Page 1 of 4 I l „> Power Supplies and Accessories 0229 Standard Features • Allows for reliable filtered and regulated power to be installed where needed • Cost effective system expansion • Provides for Genesis and Enhanced Integrity notification ap- pliance synchronization • Supports coded output operation • Self -restoring overcurrent protection • Multiple signal rates • Can be cascaded or controlled independently • Easy field configuration • On -board diagnostic LEDs identify wiring or internal faults • Standard Edwards keyed lockable steel cabinet with remov- able door • 110 and 230 Vac models available • Accommodates 18 to 12 AWG wire sizes • . Optional tamper switch • Dual battery charging rates • Optional earthquake hardening: OSHPD seismic pre -approval for component Importance Factor 1.5 itAIA SHOE, 85005-0125 .v, o^ • ed €cu i , t<a lat"'¢ pcU5. Issues Application The BPS provides additional power and circuits for notification ap- pliances and other 24 Vdc loads. It is listed for indoor dry locations and can easily be installed where needed. Fault conditions are indicated on the on -board diagnostic LEDs, opening the BPS input sense circuit and the trouble relay (if programmed). While this provides indication to the host system, the BPS can still be activated upon command. A separate AC Fail contact is available on the BPS circuit board, which can be programmed for trouble or AC Fail. There are seven on -board diagnostic LEDs: one for each NAC fault, one for battery fault, one for ground fault, and one for AC power. The unique dual -input activation circuits of the BPS can be acti- vated by any voltage from 6 to 45 VDC (filtered -regulated) or 11 to 33 Vdc (full -wave rectified, unfiltered). The first input circuit can be configured to activate 1-4 of the four possible outputs. The second input circuit can be configured to control circuits 3 and 4. When outputs are configured for auxiliary operation, these circuits can be configured to stay on or automatically deactivate 30 sec- onds after AC power is lost. This feature makes these circuits ideal for door holder applications. The BPS also has a separate 200 mA 24 Vdc output that can be used to power internal activation modules. BPS NACs can be configured for a 3-3-3 temporal or continuous output. California temporal rate outputs are also available on cer- tain models. This makes the BPS ideal for applications requiring signaling rates that are not available from the main system. Dimensions D1 3 a) a� CO K D5 O Top Viewo O 0111 D2 17.0 in 3.5 in (43.2 cm) (8.9 cm) In addition to the internally generated signal rates, the BPS can also be configured to follow the coded signal rate of the main Wire routing system NACs. This allows for the seamless expansion of existing NACs. The BPS enclosure has mounting brackets for up to three Signa- ture modules to the right of the circuit board. Engineering Specification Supply, where needed, Edwards BPS Series Booster Power Sup- plies (BPS) that are interconnected to and supervised by the main system. The BPS shall function as a stand-alone auxiliary power supply with its own fully -supervised battery compliment. The BPS battery compliment shall be sized to match the requirements of the main system. The BPS shall be capable of supervising and charging batteries having the capacity of 24 ampere -hours for Mass Notification/Emergency Communication (MNEC), life safety and security applications, and the capacity of 65 ampere -hours for access control applications. <<The BPS shall be capable of installation for a seismic com- ponent Importance Factor of 1.5.» The BPS shall provide a minimum of four independent, fully supervised Class B circuits that can be field configurable for notification appliance circuits or auxiliary 24 Vdc power circuits. BPS NACs shall be convertible to a minimum of two Class A NACs. Each BPS output circuit shall be rated at 3 amperes at 24 Vdc. Each output circuit shall be provided with automatically restoring overcurrent protection. The BPS shall be operable from the main system NAC and/or Edwards Signature Series control modules. BPS NACs shall be configurable for continuous, 3-3-3 temporal or optionally, California rate. Fault conditions on the BPS shall not impede operation of main sys- tem NAC. The BPS shall be provided with ground fault detection circuitry and a separate AC fail relay. Page 2 of 4 Route AC supply through these knockouts only (Nonpower -limited and supervised) D3 84 D4 --*3 Front View All knockouts for 3/4 in conduit (1.9 cm) D3 D4 13.0 in 6.5 in (33.0 cm) (16.5 cm) -J 0IT D5 D6 3.375 in 12.0 in (8.6 cm) (30.4 cm) Power -limited wiring area Notes 1. Maintain 1/4 -inch (6 mm) spacing between power -limited and nonpower -limited wiring or use Type FPL, FPLR, or FPLP cable per NEC. [2] Power limited and supervised when not configured as auxiliary power. Non - supervised when configured as auxiliary power. [31 Source must be power limited. Source determines supervision. 4. When using larger batteries, make sure to position the battery terminals towards the door. o n T e.:; � r. T 85005-0125 i 1,1n p+)i r,es. issues Typical Wiring Single or cascaded booster g NAC circuit CC1(S)module CC1(Sle8765 :4.'3 To next signaling device, booster, 1 NAC Circuit or anywhere on a notification appliance circuit EOL resistor Existing NAC end -of -line resistors are not required to be Fire Alarm ul ' N y NAC output#1 NAC output #2 installed at the booster's terminals. This allows multiple Control Panel " N NAC output #3 boosters to be driven from a single NAC circuit without the 5a NAC output #4 need for special configurations. s s Configuring the Booster for AC Power Fail delay operation' Notification appliance circuit NAC1/ + AUX1 - NAC2/ + AUX2 - NAC3/ + AUX3 - NAC4/ + AUX4 - 200 mA AUX N Continuous m IN Sense 1 COM OUT IN Sense 2 COM OUT NO Trouble COM Data in from previous device or Signature controller Notification A►13f1 Multiple CC1(S) modules using the BPS's sense inputs ') TB1 Notification appliance circuit (NAC) UL listed NAC1/ + UL listed EOL 15 1AUX1 - V Q a Q EOL 15 KW UL listed EOL 15 1 CC1(S) module [1][3] 0 0 NAC2/ 4 AUX2 - NAC3/ 4 AUX3 - NAC4/ 4 AUX4 - 200 mA AUX v Continuous F IN Sense 1 COM OUT IN Sense 2 COM OUT NO Trouble COM NC CT1 Data in from �I I L.�� Data out to ioule [4] Previous device </J L.* next device o or Signature controller Data out to *The Booster supports AC Power fail delay next device of three hours via its trouble contact when dip switch SW2-6 is on. All other troubles are reported to supervising module or panel without delay via Sense inputs. Security and access BPS TB1 24 V NAC1/ + AUX1 - NAC2/ + AUX2 - NAC3/ + AUX3 - NAC4/ + Notification appliance circuit 12V Security Security EOL 24DC12 device device monitoring device UL listed EOL 15 KW 47 K FWAN 10 CC1(S)module CC1(Sle8765 :4.'3 4321 1 [3] [1] Disable the BPS's ground fault jumper (Ji Page 3 of 4 To next device or end D AT A s t 1_ f_ T 85005-0125 -'dot. c d 1cl £,wrotas I,nses, Issue Contact us... Email: edwards.fire@fs.utc.com Web: ww&fflLtrecom EST is an EDWARDS brand. 1016 Corporate Park Drive Mebane, NC 27302 In Canada, contact Chubb Edwards... Email: inquiries@chubbedwards.com Web: wwwchubbedwards.com m 2013 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Specifications subject to change without notice. Edwards is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. 1. Requires installation of sepa- rate battery cabinet. 2. BPS supports batteries greater than 24 Amp hours for access control applications only. 3. For earthquake anchorage, including detailed mounting weights and center of gravity detail, refer to Seismic Applica- tion Guide 3101676. Approval of panel anchorage to site structure may require local AHJ, structural or civil engineer review. Page 4 of 4 Specifications Model "6.5 amp Booster 10 amp Booster AC Line Voltage 120VAC or 220-240VAC 50/60Hz 120VAC or 220-240VAC 50/60Hz 390 watts 580 watts Notification Appliance 3.OA max. per circuit Qo 24Vdc 3.OA max. per circuit ® 24Vdc Circuit Ratings nominal 6.5A max total all NACs I nominal 1 OA max total all NACs Trouble Relay 2 Amps @ 30Vdc Auxiliary Outputs Four configurable outputs replace NACs 1, 2, 3 or 4. as auxiliary outputs and 200 mA dedicated auxiliary. (See note 2.) Input Current (from an existing NAC) 3mA @ 12Vdc, 6mA @ 24Vdc Booster Internal Supervisory Current 70mA + 35 mA for each circuit set to AUX Booster Internal Alarm Current _ 270mA Signature Mounting Space Accomodates three two -gang modules. Maximum Battery Size 10 Amp Hours (2 of 12V1 DA) in cabinet up to 24 Amp hours with ex- ternal battery cabinet for fire and security applications; up to 65 Amp hours for access control applications in external battery box. Terminal Wire Gauge 18-12 AWG Relative Humidity _ 0 to 93% non condensing @ 32°C Temperature Rating 32° to 1207 (0° to 49°C) NAC Wiring Styles Class A or Class B Output Signal Rates Continuous, California rate, 3-3-3 temporal, or follow installed panel's NAC. (See note 1.) Ground Fault Detection Enable or Disable via jumper Agency Listings UL, ULC, CSFM 1. Madel BPSCAA provides selection for California rate, in place of temporal. 2. Maximum of 8 Amps can be used for auxiliary output. Ordering Information .Catalog Description- Number Booster Power BPS6CAA 6.5 Amp Booster Power Supply with California rate 13(5.9) BPS10l , 10 Amp Booster Power Supply 13(5.9) BPS1 OAC 10 Amp Booster Power Supply (ULC) 13(5.9) BPS10A/230 10 Amp Booster Power Supply (220\0 _ 13(5.9) BPS10CAA 10 Amp Booster Power Supply with California rate 13 (5.9) Related Equipment 12V6A5 7.2 Amp Hour Battery, two required 3.4(l.6) 12V10A 10 Amp Hour Battery, two required 9.5 (4.3) 3 -TAMP Tamper switch BC -1 EQ Seismic Kit for BC -1. Order BC -1 separately. See note 3. BPSEQ Seismic kit for BPS6A or BPS10 Booster Power Supplies. See note 3 TA S, 11 C r 85005-0125 , .1s „ iu� ;aIssues Technical Nominal Voltage 12V Nominal Capacity (20HR) 10.OAh Chemistry Lead Acid (AGM) Physical Length 151 mm 5.95 in. Width 65 mm 2.56 in. Height 111 mm 4.37 in. Total Height (w/ terminals) 117 mm 4.61 in. Weight 3.2 kg 7.06 lbs Terminal Type .250" Faston Case Material 6 months @ 25°C Black ABS Capacity 20HR, 1.80V/cell, 25°C/77°F 10.OAh 0.50A 10HR, 1.80V/cell, 250C/77°F 9.30Ah 0.93A 5HR, 1.75V/cell, 250C/77°F 8.1 OAh 1.70A 3HR, 1.75V/cell, 25°C/77°F 7.65Ah 2.55A 1HR, 1.60V/cell, 25°C/77°F 6.28Ah 6.28A Maximum Discharge Current 150A (5 seconds) Self Discharge to 80% 6 months @ 25°C Internal Resistance -22 mn r� 74X -IA ,54A1097 General Purpose Battery cation Sheet Charging Initial Charging Current 3.0 A Cycle Use 14.4V-15.OV at 25"C(77"F) Standby Use 13.5V -13.8V at 25°C(77°F) interstatebatteries.com Specifications are subject to change w/out notice. 0 Interstate Battery system at America, Inc. 05/11 MAffAMAW SL„A;1,,4Patrol9,7; ® General Purpose Battery Batteries Battery Specification Sheet Discharge Characteristics Float Charging Characteristics Temperature Effects in Relation to Battery Capacity Cycle Life in Relation to Depth of Discharge Effect of Temperature on Long Term Float Life Self Discharge Characteristics (C m,aukmenWrycbUge clumIRd (Carry autaupplemanlerycbarge beforeuas 11100%capacltyle n0ubatl.) Supplementary chal. source bare. uea.Opll.n.I Gorged way ae Mlew: 1.0hank im above 0 days at round curter 0.25CA and constant vounice].Y6Yhell. ache�getl for abovo 20hours at broad currant US50A and constant voltage 2.45Vlcell. SCM1ergetllor a-1Mou. atllmladcurtar O.OSCA. Supplemenmry charge may aden Tail. mcover@a capadry. The bcftory should novmbe left standing till this ie reached. interstatebatteries.com Specifications are subject to change w/out notice. ©Rtterstate Battery system of America, Inc. 05/11 �i��E3Slru• � Il� Safety & Communications Ceiling Speakers, Speaker -Strobes Overview The Genesis line of ceiling life safety and emergency communica- tions speakers and speaker -strobes combine high performance output with a low profile design to deliver a life safety signal solu- tion that's as versatile as it is effective. While they are designed to mount inconspicuously overhead, these devices are also rated for wall -mounted applications. Clear -lens speaker -strobes are available in high and low candela models, which feature 15 to 95, or 95 to 177 cd output (see order- ing information). Ceiling speakers feature /4 W to 2 W operation, which allows devices to be easily fine-tuned to achieve maximum benefit in exchange for the lowest possible system overhead. Light output and wattage tap settings are selectable with conven- iently -located switches. Settings remain clearly visible even after final installation, yet they are locked in place to prevent unauthorized movement after installation. High fidelity models meet the NPFA 520 Hz requirements for newly construced commercial sleeping areas. They also produce crisp, clear voice audio output that is highly intelligible over large areas. These low -profile appliances feature textured housings in architec- turally neutral white or eye-catching life safety red. Optional ALERT or FIRE markings make them ideal for applications that require differentiation between life safety and mass notification alerts. Page 1 of 6 .,p �- Speakers, Tolephones FC L� MEA `" oii°/oies' 52813 See Specifications Section for listings details, Standard Features • High Fidelity 520 Hz speaker models available Low frequency output meets NFPA standards for newly con- structed commercial sleeping areas; increases sound fidelity and audio intelligibility. • Field configurable - no need to remove the device - Select /4, 1/2, 1, or 2 watt operation - 15/30/75/95 cd and 95/115/150/177 cd models available - Switch settings remain visible even after the unit is installed • Ideal for Mass Notification applications - amber lens models available with optional ALERT markings • Unique low -profile design - 30 per cent slimmer profile than comparable signals - Available with white or red housings • Unparalleled performance - loud 90 dBA output ensures clear, crisp audio - Precision strobe timing meets UL synchronization standards - 25 Vents and 70 Vents models available • Easy to install - Fits all standard 4 -inch square electrical boxes with plenty of room for extra wire - no extension ring or trim plate needed - #18 - #12 AWG terminals - ideal for long runs, existing wiring • Approved for public and private mode applications - UL 1971 -listed as signaling devices for the hearing impaired - UL 1638 -listed as protective visual signaling appliances - UL 1480 -listed as life safety speaker - UUULC listed for ceiling or wall use DATA 3S iI C E T 85001-0641 vot=� F .gid for n izt-, mi rmsee. Issue 1.2 Strobe Application Genesis strobes are UL 1971 or 1638 listed for indoor use. Prevailing codes require strobes to be used where ambient noise conditions exceed specified levels, where occupants use hearing protection, and in areas of public accommodation. Consult with your Authority Having Jurisdiction for details. All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. Synchronization for multiple strobe lights in a single field of view is required. See the Specifications table for compatible synchronization sources. Speaker Application The suggested sound pressure level for each signaling zone used with alert or alarm signals is a minimum of 15 dB above the aver- age ambient sound level or 5 dB above the maximum sound level having a duration of at least 60 seconds, whichever is greater. This is measured 5 feet (1.5 m) above the floor. Doubling the distance from the signal to the ear will theoretically cause a 6 dB reduction in the received sound pressure level. The actual effect depends on the acoustic properties of materials in the space. Doubling the power output of a device (e.g.: a speaker from 1 W to 2 W) will increase the sound pressure level by 3 dBA. A 3 dBA difference represents a barely noticeable change in volume. Combination audible/visual signals must be installed in accor- dance with guidelines established for strobes. High Fidelity Models Genesis G4HF Series High Fidelity appliances provide highly intel- ligible voice audio output. They are also effective in areas subject to high levels of ambient noise. These appliances are approved for use in sleeping areas under conditions described below. Sleeping Room Applications Genesis GCHF Series High Fidelity appliances are ideal for hotels, dormitories, and other residential occupancies where audible output must meet the 520 Hz signaling characteristics required by NFPA 72. In sleeping areas, always ensure that the wattage tap of the speaker is set sufficiently high so that the sound pressure reaches at least 75 dBA-fast at the pillow. These appliances are part of an end-to-end audio system ap- proved for use in sleeping areas when used in conjunction with approved audio hardware and a factory -supplied 520 Hz tone. Check the System Compatibility List for other 520 Hz signaling requirements. NOTE: Speakers driven by third -party audio systems are not UL approved for use in sleeping rooms. Mass Notification Applications aueftT .;;;,l' Genesis Mass Notification appliances bring the same high-performance life safety features and unobtrusive design to mass notification applications. Models are available with optional ALERT housing labels, which make them ideal for applications that require differentiation between life safety and mass notification alerts. Page 2 of 6 Application Notes - Canada (Based in part on 1995 Canada National Building Code) The signal sound pressure level shall not exceed 110 dBA in any normally occupied area. The sound pressure level from an audible signal in a floor area used for occupancies other than residential occupancies shall not be less than 10 dBA above ambient levels, and never less than 65 dBA. In sleeping rooms the sound pres- sure level from an audible signal shall not be less than 75 dBA when any intervening doors between the device and the sleeping room are closed. Installation and Mounting All models are intended for indoor ceiling or wall applica- tions only. Speaker -strobes are mounted to a flush North -American 4" square electrical box, 21/e" (54 mm) deep. Genesis ceiling speaker - strobes simply unlatch and hinge down to open. This gains access to mounting screws and the selectable candela wattage tap switches. The shallow depth of Genesis devices leaves ample room behind the signal for extra wir- ing. Once installed with the cover in place, no mounting screws are visible. eox u...m�.� ---- Installation Note:--------------------(-------' When installed, these devices are not centered on the electrical box. Make sure boxes are mounted to compensate for this difference. Use the mount- ing template provided with installation sheet 3100614. Field Configuration Candela switch Wattage switch Genesis ceiling speaker- ! L strobes may be set for 1/4, '/2. 1, or 2 watt operation. De- (/ pending on the model, Gen- r esis ceiling speaker -strobes mdi ao mdinatn have multi -candela output (see ordering information). Output settings are changed by simply opening the device and sliding the switches to the desired settings. The speaker -strobe does not have to be removed to change the output settings. The settings remain visible through small windows on the front of the device after the cover is closed. Dimensions 8.3 dla (211 mm) .f'",t,drt,.T„i'r, ; rar^x*7^.+mrnz, o' (25 mm) 0.60"(15 mm) "A ",IIE17 85001-0641 No ,. fo, au;_i ­_: pees. Issue 1.2 Typical Sound Output (dBA) Measured at z walls setting In aneeholc chamber 520 Hz Hiah Fidelitv models (dBA1 output at 3.05 In (10 ft.) Standard Hz models (dBA) at 3.05 m (10 ft.) 1/4W 0.25W 81.4 81.5 81 25 1/2 W 0.50 W 84.5 _ 84.3 84_ VRMS 1 W 1.00W 88.2 87.2 87 VRMS 2 W 2.00 W _ 90.0 90.1 91 1/4W 0.25W 81.5 81.9 81 70 1h W 0.50 W 84.1 84.9 84 VRMS 1 W 1.10 W 87.9 87.9 87 2 W 1 2.30 W 90.8 90.8 91 Standard Hz models (dBA) at 3.05 m (10 ft.) Wiring Light output - (effective cd) �- pertenlege of reteE output 'o- , � m ao ao � Angled Hommnbl and v Hiwl output reflect the eama padann. Standard cd output models Percent of UL rating versus angle Operating current, RMS (A) 1/4W 0.25W 81 25 /z W _ 0.50 W 84 VRMS 1 W 1,00 W 87 Light output (cd) 2W 2.00W 90 75 1 30 1/4 W 0.25 W 81 70 1/2 W 0.50 W 84 VRMS 1 W 1.00 W 87 =2W 2.00 W 91 Wiring Light output - (effective cd) �- pertenlege of reteE output 'o- , � m ao ao � Angled Hommnbl and v Hiwl output reflect the eama padann. Standard cd output models Percent of UL rating versus angle Operating current, RMS (A) VDC 0.109 0.151 0.281 0.318 VPWR 0.131 0.194 0.379 0.437 Light output (cd) Clear Lens 95 75 1 30 1 15 Amber Lens 82 65 1 26 1 13 Hiah cd output models Operating current, RMS (A) VDC 0.330 0.392 0.502 0.565 VFWR 0.432 0.518 0.643 Light output (cd) Clear Lens 177 150 115 _0.693 95 Amber Lens 155 130 100 82 VDC = Volts direct current, regulated and filtered VFWR = Volts full wave rectified Doeratinc currents shown above were measured at 16 VDC and 16 VFWR. *Sound level output notes: dBA = Decibels, A -weighted. UL1480: Sound level output at 10 ft (3.05 m) measured in a reverberant room using 400 to 4,000 Hz band limited pink noise. ULC -S541: Meets or exceeds 85dBA in an anechoic chamber at 10 ft (3.05 m) on at least one setting per code. Directional characteristics: Within 6 dB of on -axis sound level when measured 90° off -axis (horizontal). Field wiring terminals accommodate #18 to #12 AWG (0.75 mm2 to 2.5 mm2) wiring. Input voltage matching the voltage rating of _ the speaker (25 or 70 Vrms) rN mi 1ll 17, 7(� (}�S To next appliance, y m end -of -line or return to =- A control equipment Input voltage matching the voltage rating of the strobe Page 3 of 6 D I T s -I F 1 17 85001-0641 a!�l to h, d tor, t� tat Issue 1.2 Specifications Housing Textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating. Red and white models available. Mounting Flush mount to North American 4 -inch square electrical box, 2-1/8 (54 mm) inches deep, or 960A-4RF round flush box. No extension ring required. Suitable for indoor wall or ceiling applications. Wire connections Screw terminals: polarized inputs for speaker, #18 to #12 AWG (0.75 mm2 to 2.5 mmg wire size. Operating environment Indoor only: 32-120° F (0-49° C) ambient temperature; 0-93% relative humidity. Agency listings and approvals, GC Models Meets ULC -S541, year 2004 UL requirements for standards 111638 and UL1971, Complies with UL1480 Fifth Edition. UUULC File Number: S2813. FM, MEA, CSFM approved. CSFM File Number: 7320-1657: 0211/0285. Speaker -strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. Agency listings and approvals, Low Frequency GCHF Models UL 464 Listed for low frequency signaling applications. Meets ULC -S541, year 2004 UL requirements for standards 11-1638 and UL1971, Complies with UL1480 Fifth Edition. FM, MEA, CSFM pending. Speaker -strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. Supervisory voltage 30 V max. Speaker Operating Voltage 25 Vrms or 70 Vrms Speaker response 400 to 4,000 Hz Output See table on previous page. Strobe Light output Field selectable. See table on previous page. Operating current See table on previous page. Strobe output rating UL 1971, UL 1638, ULC S526: selectable 15/30/75/95 cd (VM models) and 95/115/150/177 cd (VMH models) Strobe operating voltage 16 to 33 VDC (24 VDC nominal) or 16 to 33 VFWR (24 VFWR nominal) Strobe flash rate One flash per second, default. Temporal setting (private mode only): synchronized to temporal output of Genesis audible signals on same circuit. Synchronization Meets or exceeds UL 1971 requirements. Maximum allowed resistance between any two devices is 20 Ohms. Refer to specifications for the synchronization control module, this strobe, and the control panel to determine allowed wire resistance. Synchronization Sources SIGA-CC1S, SIGA-MCC1 S, SIGA-CC2A, SIGA-MCC2A, G1 M -RM, BPS6A, BPS10A, APS6A, APS10A, i0 Series, Fireshield Plus 3, 5 and 10 zone. Lens Optical grade polycarbonate. Page 4 of 6 T ,, Ii C v - 85001-0641 ., 0.:eL Ni 01 i3_tr r =;c_=es. Issue 1.2 Ordering Information Model Hgh (5 0' HzFcapidoablitye) HColor9. Markin Text ( Output Voltage I obe Speaks Shippin Weight9 Life safety Appliances GCHFRF-S2VMC ✓ Red FIRE _ None Selectable 15, 30, 75, or 95 cd 25 Volt /a, h, 1, or 2 watt) GCHFWF-S2VMC ✓ White GCF-S2VM GC-S2VM GCHFRN-S2VMC ✓ Red GCHFWN-S2VMC ✓ White GCHFRF-S2VMCH ✓ Red FIRE Selectable 95, 115, 150, 177 GCHFWF-S2VMCH ✓ White GCF-S2VMH GCHFRN-S2VMCH ✓ Red None(Selectable GCHFWN-S2VMCH ✓ White GC-S2VMH GCHFRF-S2 ✓ Red FIRE Speaker only models GCFR-S2 GCHFWF-S2 ✓ White GCF-S2 GCHFRN-S2 ✓ Red None GCHFWN-S2 ✓ White GC -S2 ---- GCWN-S2 GCHFRF-S7VMC ✓ Red FIRE 15, 30, 75, or 95 cd 70 V (Selectable Ya, '/2, 1, or watt) 1.62 lb. (0.73 k9) GCFR-S7VM GCHFWF-S7VMC ✓ — White GCF-S7VM – GCHFRN-S7VMC ✓ Red None GCHFWN-S7VMC ✓ White GC-S7VM GCHFRF-S7VMCH ✓ Red FIRE 95, 115, 150, 177 GCHFWF-S7VMCH ✓ White GCF-S7VMH GCHFRN-S7VMCH ✓ Red None GCHFWN-S7VMCH ✓ White GC-S7VMH GCHFRF-S7 ✓ Red FIRE Speaker only models GCFR-S7 Red GCHFWF-S7 ✓ White GCF-S7 GCHFRN-S7 _ ✓ Red None GCHFWN-S7 ✓ White GC -S7 GCWN-S7 Page 5 of 6 o4TA 7ki7 T,T 85001-0641 961 to he is C for i , Im c , a oses Issue 1.2 Ordering Information EDWARDS Model High I Text I Lens Strobe I I- ' Shippin Fidelity Marking color Output Voltages Weight white housings Mass Notification Appliances, Contact us... GCHFWA-S2VMA ✓ Email: edwards.fim@fs.utc.com ALERT Web: www.est-fire.com GCWA-S2VMA 13, 26, 65, GCHFWN-S2VMA ✓ Amber or 82 cd EST is an EDWARDS brand. GCWN-S2VMA None 1016 Corporate Park Drive Mebane, NC 27302 GCWN-S2VMC In Canada, Contact Chubb ED- _GCHFWA-S2VMC ✓ Clear 15, 30, 75, or 95 cd WARDS... GCWA-S2VMC 25 Volt Email: inquiries@chubbedwards.com GCHFWA-S2VMAH ✓ ALERT (Selectable Web: www.chubbedwardecom GCWA-S2VMHA 82, 100, 130, '1^,'1/2, 1. or ti United Technologies Corpora- GCHFWN-S2VMAH ✓ Amber or 155 cd 2 waft) tionn.. All l rights reserved. Specifications subject to change without notice. GCWN-S2VMHA None EDWARDS is part of UTC Building & GCWN-S2VMHC Industrial Systems, a unit of United 95, 115, 150, Technologies Corporation. GCHFWA-S2VMCH ✓ Clear or 177 cd GCWA-S2VMHC ALERT GCHFWA-S2 ✓ Speaker only models GCWA-S2 1.62 Ib. GCHFWA-S7VMA ✓ (0.73 kg.) ALERT GCWA-S7VMA 13, 26, 65, GCHFWN-S7VMA ✓ Amber or 82 cd GCWN-S7VMA None GCWN-S7VMC GCHFWA-S7VMC ✓ Clear 15, 30, 75, or 95 cd GCWA-S7VMC ALERT 70 V GCHFWA-S7VMAH ✓ (Selectable GCWA-S7VMHA 82, 100, 130, '1^.'1/_. 1. or GCHFWN-S7VMAH ✓ Amber or 155 cd 2 watt) GCWN-S7VMHA None GCWN-S7VMHC GCHFWA-S7VMCH ✓ Clear 95, 115, 150, or 177 cd GCWA-S7VMHC ALERT GCHFWA-S7 ✓ Speaker only models Accessories SIGA-CCiS Page 6 of 6 u A - r, , H F. F - 85001-0641 No .-_.. riiis*af aJm^r rp-,ses. Issue 1.2 9 TM PLife Safety & Communications Synchronization Output Module SIGH-CC1 S MCC1 S Overview SIGA-CC1S and MCC1S Synchronization Output Modules are intelligent analog addressable devices that form part of EST's Signature line of products. The actual operation of the SIGA-CC1 S and MCC1 S is determined by the "personality code" selected by the installer, which is downloaded to the module from the Signa- ture loop controller during system configuration. Depending on their assigned personality, Synchronization Output Modules may be used as a signal power riser selector to provide synchronization of fire alarm signals across multiple zones, or for connecting, upon command from the loop controller, supervised Class B signal or telephone circuits to their respective power inputs. The power inputs may be polarized 24 Vdc to operate au- dible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation speakers and firefighter's telephones. Page 1 of 4 .:7 Intelligent Input -Output Standard Features • Provides UL 1971 -compliant auto -sync output for visual signals Use for connecting a supervised output circuit to a supervised 24 Vdc riser input and synchronizing multiple notification appli- ance circuits. • Functions as an audible signal riser selector Use as a synch module or for connecting supervised 24 Vdc AudibleNisible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs. • Built-in ring -tone generator When configured for telephone circuits, the SIGA-CC1S gener- ates its own ring -tone signal, eliminating the need for a sepa- rate ring -tone circuit. • Automatic device mapping Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop. • Electronic addressing Programmable addresses are downloaded from the loop con- troller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set. • Intelligent device with microprocessor All decisions are made at the module to allow lower com- munication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required. n;,,„ rfE F85001-0543 �bt tc ! sr=61,,-r h - a p,:ses. Issue 3.1 ,.......-. �,....«., ..,, MFA �- •A........... Patented Standard Features • Provides UL 1971 -compliant auto -sync output for visual signals Use for connecting a supervised output circuit to a supervised 24 Vdc riser input and synchronizing multiple notification appli- ance circuits. • Functions as an audible signal riser selector Use as a synch module or for connecting supervised 24 Vdc AudibleNisible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs. • Built-in ring -tone generator When configured for telephone circuits, the SIGA-CC1S gener- ates its own ring -tone signal, eliminating the need for a sepa- rate ring -tone circuit. • Automatic device mapping Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop. • Electronic addressing Programmable addresses are downloaded from the loop con- troller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set. • Intelligent device with microprocessor All decisions are made at the module to allow lower com- munication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required. n;,,„ rfE F85001-0543 �bt tc ! sr=61,,-r h - a p,:ses. Issue 3.1 Application The SIGA-CCiS mounts to a standard North American two -gang electrical box, making it ideal for locations where only one module is required. Separate 1/0 and data loop connections are made to each module. The SIGA-MCC1 S is part of the UIO family of plug-in Signature Series modules. It functions identically to the SIGA-CC1 S, but takes advantage of the modular flexibility and easy installation that characterize all UIO modules. Two- and six -module U10 mother- boards are available. These can accommodate individual risers for each on -board module, or risers that are shared by any combina- tion of its UIO modules. All wiring connections are made to termi- nal blocks on the motherboard. UIO assemblies may be mounted in Edwards enclosures. Personality Codes The operation of the SIGA-CC1 S is determined by their sub -type code or "Personality Code". The code is selected by the installer depending upon the desired application and is downloaded from the loop controller. Personality Code 5: Signal Power or Audio Evacuation (sin- gle riser). Configures the module for use as a Class B Audible/ Visible Signal power (24 Vdc polarized) or Audio Evacuation (25 or 70 VRMS) power selector. The ring -tone generator is disabled. The output circuit is monitored for open or shorted wiring. If a short exists, the control panel inhibits the activation of the audible/ visible signal circuit to prevent connection to the power circuit. Personality Code 6: Telephone with ring -tone (single riser). Configures the module for use as a Telephone power selector. When a telephone handset is plugged into its jack or lifted from its hook, the module generates its own Ring -Tone signal. A separate ring -tone circuit is not needed. The module sends this signal to the control panel to indicate that an off -hook condition is present. When the system operator responds to the call, the ring -tone signal is disabled. Personality Code 25: Visual Signal Synchronization. This personality code configures the module to provide synchronization of fire alarm signals across multiple zones. It functions as a signal power (24 Vdc) riser selector. The output wiring is monitored for open circuits and short circuits. A short circuit will cause the fire alarm control panel to inhibit the activation of the audible/visual signal circuit so the riser is not connected to the wiring fault. Warnings & Cautions This module will not operate without electrical power. As fires fre- quently cause power interruption, we suggest you discuss further safeguards with your fire protection specialist. Edwards recommends that these modules be installed according to latest recognized edition of national and local fire alarm codes. Compatibility The Synchronization Output Module is compatible with EST's Sig- nature Loop Controller operating under EST3 version 2.0 or higher, and QuickStart Signature Loop Intelligent Controller. Page 2 of 4 Installation The SIGA-CCiS: mounts to North American 2-1/2 inch (64 mm) deep 2 -gang boxes and 1-1/2 inch (38 mm) deep 4 inch square boxes with 2 -gang covers and SIGA-MP mounting plates. The terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2) wire size. SIGA-MCCiS: mount the UIOxR motherboard inside a suitable Edwards enclosure with screws and washers provided. Plug the module into any available position on the motherboard and secure the module to the motherboard with the captive screws. Wiring connections are made to the terminals on the motherboard (see wiring diagram). UIOxR motherboard terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2) wire size. UIO Motherboard 6-32 Self -tapping screws Plug-in(U10) captive ..Module"' screws —� —Foll- - N6 Flat washers Cabinet or electrical enclosure Electronic Addressing The loop controller electronically addresses each module saving valuable time during system commissioning. Setting complicated switches or dials is not required. Each module has its own unique serial number stored in its "on -board memory". The loop control- ler identifies each device on the loop and assigns a "soft" address to each serial number. If desired, the modules can be addressed using the SIGA-PRO Signature Program/Service Tool. Testing & Maintenance The module's automatic self-diagnosis identifies when it is defec- tive and causes a trouble message. The user-friendly maintenance program shows the current state of each module and other perti- nent messages. Single modules may be turned off (de -activated) temporarily, from the control panel. Scheduled maintenance (Regular or Selected) for proper system operation should be planned to meet the requirements of the Authority Having Jurisdiction (AHJ). Refer to current NFPA 72 and ULC CAN/ULC 536 standards. D1,11114 r 85001-0543 Hol 'o 1:e n r � {I;¢t- pn pufpcscs. Issue 3.1 Typical Wiring SIGA-CC1S (Standard Mount) Riser in (+l Riser in I-) Data in l+l Data in I-) Personality typicalSpeaker Circuit Code 5 UVULC Listed 4INW EOL Personality Typical Telephone Circuit Code 6 1♦ C C UALIC ed 4 KW EOL UVULA Listed 47NW EOL Multiple CCI (8) modules using the BPS's sense inputs NAC1/ + AUX1 - NAC2/ + AUX2 - NAC3/ + AUX3 - NAC4/ + AUX4 - 200 mA AUX , Continuous F IN Sense 1 COM OUT IN Sense 2 COM OUT NO Trouble COM NC Page 3 of 4 Notification appliance circuit (NAC) _UL listed EOL 15 KW Notification appliance circuit (NAC) s s UL listed EOL 15 KW 0 0 109 109 CC1(S)module CC1(S)module 0 0 8785 4321 0 0 8765 4321 iti r 131 SIGA-Mil (UIO Mount) Green LED Nil Red LED 1A[tivel Personality Typical Speaker l Code 5 UVUL Listed %NW EOL Personality Typical Telephone Circuit Code 6 C C C UJULC ted 4 KW VOL Personality Enhanced Integrity and Genesis Devices Code 25 4 4 uUULC Listed 47NW EOL 4 Riser l Out UIOIRI series motherboard Riser L out Risen In tTnTr sF1=r T 85001-0543 'dof 4, �, Li focistr,11a, o u . v. Issue 3d a4 A UTC Fire & Security Company Detection & alarm since 1872 U.S. T 888-378-2329 F 866-503-3996 Canada Chubb Edwards T 519 376 2430 F 519 376 7258 Southeast Asia T: +65 6391 9300 F: +65 6391 9306 India T : +91 80 4344 2000 F: +91 80 4344 2050 Australia T +61 3 9239 1200 F +61 3 9239 1299 Europe T +32 2 72511 20 F +32 2 721 86 13 Latin America T 305 593 4301 F 305 593 4300 utcfireandsecurity.com m 2010 UTC Fire & Security. All rights reserved. Page 4 of 4 Specifications Catalog Number SIGA-CCIS SIGA-MCCIS Surface Mount Box - Red, 2 -gang North American 21/2 inch (64 mm) 27193-26 Surface Mount Box - White, 2 -gang deep two -gang boxes and 1'/2 Plugs into U102R, U106R or U106 Mounting inch (38 mm) deep 4 inch square Motherboards - Two Module Positions boxes with 2 -gang covers and SIGA-U106R Universal Input -Output Module Board W1 is Inputs SIGA-MP mounting plates Description Synchronization Output Module Code 50 (factory set) _Type Address Requirements Uses one module address Wiring Terminations Suitable for #12 to #18 AWG (2.5 mm2 to 0.75mm2) Operating Current Standby = 223pA Activated = 1 00u Operating Voltage 15.2 to 19.95 Vdc (19 Vdc nominal) 24 Vdc = 2 amps Output Rating 25 V Audio = 50 watts 70 V Audio = 35 watts Construction High Impact Engineering Polymer Storage and Operating Operating: 32°F to 120T (0°C to 49°C) Environment Storage: -4°F to 140°F (-20°C to 60°C) Humidity: 0 to 93% RH LED Operation Green LED - Flashes when polled Red LED - Flashes when in alarm/ active Compatibility Use with: Signature Loop Controller under EST3 version 2.0 or higher Agency Listings UL, ULC, CSFM, MEA Ordering Information Catalog Number Description ..- MCCI S Synchronization Output Module (UIO Mount) - UL/ULC Listed 0.18 (0.08) Related Equipment 27193-21 Surface Mount Box - Red, 2 -gang 2(1.2) 27193-26 Surface Mount Box - White, 2 -gang 2 (1.2) SIGA-U102R Universal Input -Output Module Board w/Riser Inputs 0.32 (0.15) - Two Module Positions SIGA-U106R Universal Input -Output Module Board W1 is Inputs 0.62 (0.28) - Six Module Positions MFC -A supports Signature Module Mounting Plates 7.0 (3.1) SIGA-MPI Signature Module Mounting Plate, 1 footprint 1.5 (0.70) 1 , TA S H 1- ._ - 85001-0543 c fc, nst&( ion uirposes. Issue 3.1 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-1657:0229 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center Parkway, Bradenton, 34202 United States Contact: Jewell Conover (941) 739-4358 Fax (941) 308-8123 Email: rhonda.conover@fs.utc.com DESIGN: Models BPS6A, BPS10A, BPS6A/230, BPS10A/230, BPS6CAA, and BPS10CAA remote booster power supplies. *Models APS6A, APS6A/230, APS6CAA, APS10A, and APS10AI230 Auxiliary Power Supply. Refer to listee's data sheet for detailed product description and operational considerations. RATING: 120 V/240 V, 60 Hz, 50 Hz INSTALLATION: In accordance with listee's printed installation instruction, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, rating, and UL label. APPROVAL: Listed as remote booster power supplies for use with listee's separately listed compatible fire make an independent verification of any claims. This alarm control units to extend the notification appliance circuit. Refer to listee's Installation it Instruction Manual for details. NOTE: Formerly 7300-1591:229 7-29-10 me Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not it an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: duly 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 9 LISTING No. 7320-1657:0324 Page 1 of 2 CATEGORY: 7320 -- SPEAKERS LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center Parkway, Bradenton, 34202 United States Contact: Jewell Conover (941) 739-4358 Fax (941) 308-8123 Email: rhonda.conover@fs.utc.com DESIGN: Models GCHFWA-S2, GCHFWA-S7, GCHFRF-S2, GCHFRF-S7, GCHFWF-S2, GCHFWF-S7, GCHFRN-S2, GCHFRN-S7, GCHFWN-S2 and GCHFWN-S7 Speakers. Models GCHFRF-S2VMC, GCHFRF-S7VMC, GCHFRN-S2VMC, GCHFRN-S7VMC, GCHFWA-S2VMC, GCHFWA-S7VMC, GCHFWF-S2VMC, GCHFWF-S7VMC, GCHFWN-S2VMC and GCHFWN-S7VMC Speaker/Strobes. Models GCHFRF-S2VMCH, GCHFRF-S7VMCH, GCHFRN-S2VMCH, GCHFRN-S7VMCH, GCHFWA-S2VMCH, GCHFWA-S7VMCH, GCHFWF-S2VMCH, GCHFWF-S7VMCH, GCHFWN-S2VMCH and GCHFWN-S7VMCH Speaker/Strobes. Models GCHFWA-S2VMA, GCHFWA-S7VMA, GCHFWN-S2VMA and GCHFWN-S7VMA Speaker/Strobes. Models GCHFWA-S2VMAH, GCHFWA-S7VMAH, GCHFWN-S2VMAH and GCHFWN-S7VMAH Speaker/Strobes. Refer to listee's data sheet for detailed product description and operational considerations. RATING: 25 Vrms or 70 Vrms 1/4 W, 1/2 W, 1 W, or 2W Normal candela, clear lens: 15/30/75/95 cd Normal candela, amber lens: 13/26/65/82 cd High candela, clear lens: 95/115/150/177 cd High candela, amber lens: 82/100/130/155 cd INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name model number, electrical/candela rating and UL label. 07-21-15 gt Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not O� an endorsement or recommendation of the item listed. This listing should not be used to verify correct " operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing No. 7320-1657:0324 Page 2 of 2 APPROVAL: Listed as speakers and speaker/strobes for use with separately listed compatible fire alarm control unit. Clear lens models (suffix ending in C or CH) are suitable for the hearing impaired. The lights are only considered synchronized when used in conjunction with Model G1 M -RM sync module (CSFM No. 7300-1657:0201) or Model SIGA-CC1S auto -sync output module (CSFM No. 7300-1657:0121). For indoor ceiling mounted use only. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) in accordance with NFPA 72, 2010 Edition is required, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal. Refer to listee's Installation Instruction Manual for details. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) is required for sleeping areas in accordance with NFPA 72, 2010 Edition is required, the appliance must be used with a fire alarm control unit that can generate the low frequency signal. Refer to listee's Installation Instruction Manual for details. 07-21-15 gt Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed = the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 7300-1657:0121 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: EDWARDS, A Division of UTC Fire & Security Americas Corporation, Inc.8985 Town Center Parkway, Bradenton, 34202 United States Contact: Jewell Conover (941) 739-4358 Fax (941) 308-8123 Email: rhonda.conover@fs.utc.com DESIGN: Models SIGA-CC1, SIGA-CC2, SIGA-CT1, SIGA-CT1HT, SIGA-CT2, SIGA-CR, SIGA-CRR, SIGA-UM, SIGA-MM1, SIGA-WTM, SIGA-IM, SIGA-MDM, SIGA-MAB, SIGA-MCT2, SIGA-MCC1, SIGA-MCC2, SIGA-MCR and SIGA-MCRR remote transponders. Models SIGA-AA30 and SIGA-AA50 audio amplifiers. Models SIGA-APS and SIGA-APS-220 power supplies. Models SIGA-MB4, SIGA-MP1, SIGA-MP2 and SIGA-MP2L mounting plates. Models SIGA-UI02R, SIGA-UIO6 and SIGA-UIO6R motherboards. Model CS-SIGA-CCI P releasing module. Models SIGA-CC1S and SIGA-MCC1S Auto -Sync Output Modules. Models MFC -A and MFC -AD Enclosures. Model SIGA-CR2 Control Relay Module. Model SIGA-CT1 HT; Signature Series High Temperature Single Input Module. *SIGA-CRH High Power Control Relay Module. Refer to listee's data sheet for additional detailed product description and operational consideration. RATING: 15.2 - 19.95 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances the test results and/or other data but does not and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control verify correct units. Refer to listee's Installation Instruction Manual for details. NOTE: Formerly 7300-1591:121 and 7300-1388:178 *Rev 01-11-16 gt 77 Date Issued: ,July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed '/T the test results and/or other data but does not make an independent verification of any claims. This listing is not ei an endorsement or recommendation of the item listed. This listing should not be used to verify correct " operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: ,July 01, 2019 Listing Expires June 30, 2020 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division ILL 11701110- BEI" F Building Electronic Controls, Inc. State Contractors License 729905 CONTACT INFORMATION COMPANY: BUILDING ELECTRONIC CONTROLS, INC. ADDRESS: 2246 LINDSAY WAY GLENDORA, CA 91740 PHONE: 909.305.1600 FAX: 909.305.1603 CONTACT: RICK TAYLOR 2246 Lindsay Way Glendora, CA 91740 PHONE: (909) 305-1600 FAX: (909) 305-1603