Loading...
HomeMy WebLinkAboutF2022-0044 - Misc*** PROJECT SUBMITTAL DOCUMENTS *** Section f - License & U.L. Certification Section 2 - Equipment Specification Datasheets DATA SHEET# PART# DESCRIPTION CSFM# 1. SD500-AIM Silent Knight Addressable Monitor Module 7300-0559:0132 2. RTS151KEY System Sensor Remote Test Switch with Key 7300-1553:0212 Section 3 - CSFM Listing Sheets Enclosed in this Booklet are the data sheets describing the equipment Interface Security Systems Is proposing to furnish. Revision Note: Light italic text indicates items previously submitted and approved. Dmk Text indicates revisions to the original submittal and new submittal items. MASON SETTLEMOIR Interface Security Systems Designer F2oZo7-(m,ty 'sly 1546 n flue 01.12.soss Interface 3750 ele Ave. ICA 200 ® LSuite ong Beach, 90808 9 Phone: 949-474-0555 Project Name: ® Fax: 949-474-5511 PANDA EXPRESS - SUITE 1316 www.interfacesys.com Project Address: SystemType: Project #: 1316 BISON AVE. FIRE SPRINKLER MONITORING T.I. 11226 NEWPORT BEACH, CA. 92660 *** PROJECT SUBMITTAL DOCUMENTS *** Section f - License & U.L. Certification Section 2 - Equipment Specification Datasheets DATA SHEET# PART# DESCRIPTION CSFM# 1. SD500-AIM Silent Knight Addressable Monitor Module 7300-0559:0132 2. RTS151KEY System Sensor Remote Test Switch with Key 7300-1553:0212 Section 3 - CSFM Listing Sheets Enclosed in this Booklet are the data sheets describing the equipment Interface Security Systems Is proposing to furnish. Revision Note: Light italic text indicates items previously submitted and approved. Dmk Text indicates revisions to the original submittal and new submittal items. MASON SETTLEMOIR Interface Security Systems Designer Interface LICENSE 8 UL CERTIFICATIONS Section 1 CONTRACTORS dCa STATE LICENSE BOARD ACTIVE LICENSE al x..469046 E".. LLC "...,�. INTERFACE SECURITY SYSTEMS LLC DBA INTERFACE SYSTEMS a. 08/31/2023 www.csib.ca.gov UL LLC CERTIFICATE OF COMPLIANCE COVER PAGE Listed Service From: LONG BEACH, CA (LONG BEACH) Alarm Service Company: INTERFACE SECURITY SYSTEMS L L C, DBA INTERFACE SYSTEMS 3750 SCHAUFELE AVE STE 200 LONG BEACH CA 90808-1779 08 -JAN -2021 Applicant Subscriber No: 743925-001 Service Center Number: 7 Contract Number is: LLC20115357 ACTIVE LISTINGS CCN File No. Vol. No. UUFX 57279 1 Service Center: INTERFACE SECURITY SYSTEMS L L C, DBA INTERFACE SYSTEMS 3750 SCHAUFELE AVE STE 200 LONG BEACH CA 90808-1779 UApplicant ID No: 743925-001 Service Center No 7 Expires: 31 -MAR -2022 CERTIFICATE OF COMPLIANCE THIS IS TO CERTIFY that the Alarm Service Company indicated below is included by Underwriters Laboratories Inc. (UL) in its Product Directories as eligible to use the UL Listing Mark in connection with Certificated Alarm Systems. The only evidence of compliance with UL's requirements is the issuance of a UL Certificate for the Alarm System and the Certificate is current under UL's Certificate Verification Service. This Certificate does not apply in any way to the communication channel between the protected property and any facility that monitors signals from the protected property unless the use of a UL listed or Classified Alarm Transport Company is specified on the Certificate. Listed Service From: LONG BEACH, CA (LONG BEACH) Alarm Service Company: (743925-001) INTERFACE SECURITY SYSTEMS L L C, DBA INTERFACE SYSTEMS 3750 SCHAUFELE AVE STE 200 LONG BEACH CA 90808-1779 Service Center: (743925-001) INTERFACE SECURITY SYSTEMS L L C, DBA INTERFACE SYSTEMS 3750 SCHAUFELE AVE STE 200 LONG BEACH CA 90808-1779 The Alarm Service Company is Listed in the following Certificate Service Categories: File - Vol No. CCN Listing Category; S7279-1 UUFX [Signal and Fire Alarm Equipment and Services] (Protective Signaling Services) Central Station ***THIS CERTIFICATE EXPIRES ON 31 -MAR -2022 *** "LOOK FOR THE UL ALARM SYSTEM CERTIFICATE" UL LLC CERTIFICATE OF COMPLIANCE COVER PAGE Listed Service From: EARTH CITY, MO Alarm Service Company: INTERFACE SECURITY SYSTEMS L L C 3773 CORPORATE CENTRE DR EARTH CITY MO 63045-1130 08 -JAN -2021 Applicant Subscriber No: 750680-001 Service Center Number: 1 Service Center: INTERFACE SECURITY SYSTEMS L L C 3773 CORPORATE CENTRE DR EARTH CITY MO 63045-1130 ACTIVE LISTINGS CCN File No. Vol. No. UUJS 55402 1 UUFX S3521 1 CPVX BP6545 1 Service Center: INTERFACE SECURITY SYSTEMS L L C 3773 CORPORATE CENTRE DR EARTH CITY MO 63045-1130 UApplicant ID No: 750680-001 Service Center No 1 Expires: 31 -MAR -2022 CERTIFICATE OF COMPLIANCE THIS IS TO CERTIFY that the Alarm Service Company indicated below is included by Underwriters Laboratories Inc. (UL) in its Product Directories as eligible to use the UL Listing Mark in connection with Certificated Alarm Systems. The only evidence of compliance with UL's requirements is the issuance of a UL Certificate for the Alarm System and the Certificate is current under UL's Certificate Verification Service. This Certificate does not apply in any way to the communication channel between the protected property and any facility that monitors signals from the protected property unless the use of a UL listed or Classified Alarm Transport Company is specified on the Certificate. Listed Service From: EARTH CITY, MO Alarm Service Company: (750680-001) INTERFACE SECURITY SYSTEMS L L C 3773 CORPORATE CENTRE DR EARTH CITY MO 63045-1130 Service Center: (750680-001) INTERFACE SECURITY SYSTEMS L L C 3773 CORPORATE CENTRE DR EARTH CITY MO 63045-1130 The Alarm Service Company is Listed in the following Certificate Service Categories: File - Vol No. CCN Listina Cateaory BP6545 -1 CPVX [Burglar Alarm Systems] Central Station S3521 -1 UUFX [Signal and Fire Alarm Equipment and Services] (Protective S5402-1 UUJS Signaling Services) Central Station [Signal and Fire Alarm Equipment and Services] (Protective Signaling Services) Local, Auxiliary, Remote Station and Proprietary ***THIS CERTIFICATE EXPIRES ON 31 -MAR -2022 *** "LOOK FOR THE UL ALARM SYSTEM CERTIFICATE" EQUIPMENT SPECIFICATION DATASHEETS Pfaparedby, Section 2 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING • BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-1653:0212 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: System Sensor, Unincorporated Div of Honeywell Int'I Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email:lisa.brant@honeywell.com i DESIGN: Models RTS151, RTS151KEY 10OZ Duct Smoke Detector accessories. Referto listee's data sheet for detailed product description and operational considerations. RATING: Refer to the installation manuals. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. 04-03-09 bh This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed it the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2021 Listing Expires June 30, 2022 Authorized By: DAVID CASTILLO,, M.E., F.P.E. Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 7300-0559:0132 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: SILENT KNIGHT SECURITYOne Fire -Lite Place, Northford, CT 06472-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Model SD500-ARM Relay Module, *SD500-ANM addressable NAC Module and SD500-AIM, SD500-MIM Addressable Input Modules. Models SD500-ARM provides inputs for a control unit communication circuit and have two sets of dry relay contacts. Models SD500-AIM and -MIM provide additional input circuits*. *Rev. 06-10-19 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not it an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: ,July 01, 2021 Listing Expires June 30, 2022 Authorized By: DAVID CASTILLO,, M.E., F.P.E. Fire Engineering Division Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: SD500-ARM: 120 VAC, 30 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. *Rev. 06-10-19 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not it an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: ,July 01, 2021 Listing Expires June 30, 2022 Authorized By: DAVID CASTILLO,, M.E., F.P.E. Fire Engineering Division Specifications, Duct Smoke Detector Accessories Voltage Regulated 24 VDC Power Requirements Alarm LED: 2.8 to 32 VDC, 12 mA max. Ooeratina Voltaoe 16 to 33 VDC Total Current: 105 mA max. Maximum Alarm Current 30 mA Temperature Range O -C to 49-C(327 to 1207) Relative Humidity 10 to 93% non -condensing Wire Gauge 12 to 18 AWG Dimensions 4.6"H x2.9"W x.45"D Voltage Regulated 12 DC or FWR (Full Wave Rectified) or Regulated 24 VDC or FWR Operating Voltage 8 t 33 VDC (9 to 33 VDC with Sync -Circuit" Module) Sounder Current Draw 22 mA RMS max. at 8 to 17.5 Volts DC 17 mA RMS max. at 8 to 17.5 Volts FWR 29 mA RMS max. at 16 to 33 Volts DC 25 mA RMS max. at 16 to 33 Volts FWR Temperature Range O`C to 49C(327 to 1207) Humidity Range 10 to 93% non -condensing Nominal Sounder Frequency 3 kHz Wire Gauge 12 to 18 AWG Dimensions 4.6"H x9"W x 0.45"D Voltage Range Conventional System: 3.1 to 32 VDC Intelligent System: 18 to 32 VDC Maximum Alarm Current 12 mA Dimensions 4.6"H x 2.8"W x 1.3"D RTS151 UL 54011 RTS151 KEY UL S2522 RA100Z UL S2522 MHW UL 54011 10 VA @ 32 VDC Reset Switch 10 VA@32 VDC Alarm Response Time 40 seconds max. Temperature Range -10°C to 61(14'F to 1407) Relative Humidity 9596 non -condensing Wire Gauge 14 to 18 AWG Dimensions 4.8"Hx2.90"WxJ.4�� RTS1 51 KEY Remorteltest Power Requirements Station with Key Power LED (Green): 14 to 35 VDC, 12 mA max. Voltage Alarm LED (Red): 2.8 to 32 VDC, 12 mA max. Power Requirements Total Current: 105 mA max. Alarm Response Time 40 seconds max. Temperature Range -1 OoC to ii (I45Fto 14n -F) Relative Humidity 95% non -condensing Wire Gauge 14 to 18 AWG Dimensions 4.6"H x 2.75"W x 1.8"D Voltage 20 to 29 VDC Power Requirements Standby: 3.0 mA max. Trouble: 16.0 mA max. Alarm without strobe: 30 mA max. Alarm with strobe: 55 mA max. Sounder 85 dBA at ten feet Temperature Range -1 OoC to 51 (WE to 140°F) Relative Humidity 95%non-condensing Wire Gauge 14 to 22 AWG Dimensions 4.8"Wx5.3"Hx 1.6"D For the very latest product specifications and listing information, please visit the System Sensor Web site at www.systemsensoctnm. tf: APA151 ULS4011 MHRULS4011 RTS2-A0S UL S2522 AOS "SwTEM ©»a9s "'hod�,o,. SENSOR Phone 63-377-49 nw[u.... �:n�u::ueimmma�gig 0,eden�� cd un d=l�oa�:ro, Phone' 800-SENSOR2 •Fax: 630-377-6495 .�m�u:ualnforma�mnma ii.- 5NI- :l.�n�:urm;:a:m:nee,. nosaa�; ow� srov� %iwo 4�� SYSTEM SENSOR® Duct Smoke Detector Accessories Expand the versatility of the InnovairFlex"line of duct smoke detectors with System Sensor notification and test accessories. Available Accessories Duct smoke detector accessories add functionality to the duct APA151 Piezo Annunciator smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All MHR Mini -Horn, Red System Sensor duct smoke detectors and accessories are UL listed. MHW Mini-Horn,White The APA1 S1 piezo annunciator, which replaces the APA451 with RA100Z/RA100ZA Remote Annunciator a new, improved look, provides an audible alarm signal, a red LED RTS151 Remote Test Station to indicate alarm status, and a green LED to indicate power status. RTS151 KEY Remote Test Station with Key It is intended for use with System Sensor 4 -wire conventional duct smoke detector applications without a system control panel, to RTS2 Multi -Signaling Accessory comply with NFPA 90A AOS Add -On Strobe The MHR and MHW SpectrAlerf Advance mini -horns feature RTS2-AOS Multi -Signaling Accessory temporal or continuous tones at high and low volume settings. Their small footprint allows mounting to single -gang back boxes for applications where a small device is desired. The RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition. The RTS151 and RT5151 KEY remote test stations are automatic fire detector accessories designed to test duct smoke detectors from a convenient location. For 4 -wire detectors, the RTS151 KEY test station features a multi -colored LED that alternates between steady green and red. For 2 -wire detectors, the LED illuminates red for alarm. Agency Listings Ul FM LISTED ° `° The RTS2 and RTS2-AOS multi -signaling accessories are designed to work with InnovairFlex 4 -wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately).The AOS (Add -On Strobe) is an optional accessory included with the RTS2-AOS model. SD500-AIM & SD500-MIM Addressable Input Modules Engineering Specifications The contractor shall furnish and install where indicated on the plans, addressable input modules Silent Knight SD500-AIM or SD500-MIM. The modules shall be UL listed and compatible with Silent Knight's IntelliKnight FACPs The SD500-MIM shall fit inside a single gang electrical box. The SD500-AIM shall be supplied with a plastic cover and shall be suitable for mounting to a 4" -square or double gang electrical box. The SD500-AIM addressable input module must provide a monitor LED that is visible from outside the cover plate � ' � en9 mforetl BA�� eon All Vfm�ls Su(rervsetl i bct wa Ia _ I Ea r- Compatible FACPs\ Ordering Information 5820XL S!3500 -AIM Input Module 5820XL-EVS Addressable input module with ivory cover plate. 5808 5700 SD500-MIM Input Module Addressable mini input module. ®SILENT This document is not intended to be used for installation purposes. We try to keep our product KNIGHT information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact by Honeywell Silent Knight 12 Clintonville Road, Northford, CT 06472-1610. Phone: (800) 328-0103 Fax: (763) 493-6475 For Technical Support, Please call 800-446-6444.. www.slientknight.com SILENT KNIGHT by Honeywell SD500-AIM & SD500-MIM Addressable Input Modules IntelliKnight's addressable contact monitor modules combine fast response with pinpoint location ID. A combination that saves lives and property. The SD500-AIM and SD500-MIM are addressable input modules for use with Silent Knight IntelliKnight fire alarm control panels (FACP). The SD500-AIM and SD500-MIM are designed to be used with pull stations, water flow switches, and other applications requiring dry contact alarm initiation devices. The SD500-AIM addressable input module mounts to a 4" -square box. The SD500-MIM mini input module fits inside a single gang box. The modules are supervised, single input contact monitors. Using an EOL resister, they monitor for alarm contact closures and for open circuit wiring fault conditions. The SD500-AIM and SD500-MIM offer a compact design for adaptability and pleasing aesthetics as well as easy installation and stable operation—a flexible solution for all your fire protection needs. For more information about the IntelliKnight system, or to locate your nearest source, please call 1-800-328-0103. Description The SD500-AIM and SD500-MIM are addressable input modules for use with the Intelliknight Fre alarm control panels (FACPs). The SD500-AIM addressable input module mounts to a 4" -square box. The SD500-MIM mini input module fits inside a single gang box. Both input modules are designed to be used with pull stations, water flow switches, and other applications requiring dry contact alarm initiation devices. These modules are supervised, single input contact monitors. Using an EOL resistor, they monitor for alarm contact closures and for open circuit wiring fault conditions. If a fault occurs in the wiring, the module alerts the FACP. Each addressable input module is programmed with a unique signal line circuit (SLC) loop address. Features • Single contact monitor SD500-AIM supports Class A (Style D) or Class B (Style B) contact monitor wiring SD500-MIM support for Class B (Style B) contact monitor wiring Attractive ivory cover plate with the SD500-AIM Small and lightweight size allows for flexible mounting options with the SD500-MIM • DIP switch programmable for fast installation • Up to 2500 ft wiring distance from either input module to contact • Use up to 14 gauge wire • UL listed Electrical Specifications Standby Current: 0.55 mA Alarm Current: 23 mA max for one device; 46 mA max for two devices; 0.55 mA for each additional device Line Resistance: 502 max Mechanical Specifications SD500-AIM Physical Description Dimensions: 4.9" W x 4.9" H x 1" D (12.4Wx 12.4 H x 2.5 D cm) Weight: 3.6 oz (120.1 g) Color: Ivory cover plate SD500-MIM Physical Description Dimensions: 1.5'Wx2.5'Hx0.7"D (3.8 W x 6.4 H x 1.8 D cm) Weight: 1.6 oz (45.4 g) Environmental Operating Temperature: 32°F — 120°F (0°C — 49°C) Humidity: 10% — 93% non -condensing Qw SD500•AIM SD500•MIM Approvals NFPA 71 & NFPA 72 UL 864 CSFM 7300-0559: 132 MEA 429-92-E Vol. IX FM Approved for use with the 5820XL PN# 350231 Rev. G © 2016 Honeywell International Inc